Genetic engineering?? Uh oh.... KHAAAAAAN!!!
http://i0.kym-cdn.com/entries/icons/original/000/002/357/400px-khan.jpg All the best, Edd ------------------------------- Edd M. Schillay Starship Enterprise NCC-1701-B C&C 37+ | City Island, NY www.StarshipSailing.com ------------------------------- 914.332.4400 | Office 914.774.9767 | Mobile ------------------------------- Sent via iPhone 6 iPhone. iTypos. iApologize At 07:45 PM 11/03/2015, you wrote: > hmmmm... > > Genetic engineering.... > > The possibilities...the possibilities... > > > > David F. Risch > (401) 419-4650 (cell) > > > Date: Wed, 11 Mar 2015 22:41:58 -0400 > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Tool recommendation > From: cnc-list@cnc-list.com > > I never cease to be amazed by the information I get from this list. This > group has an amazing array or talents and experiences, not just in sailing > but also in engineering, metallurgy, mechanics, chemistry etc. etc. The only > engineering I can provide advice on is genetic engineering and I suspect > there are not going to be a lot of questions on that topic. Sigh! > I will be sure to report back on tools and bolts when I find what gets this > one off. I may buy a few wrenches just to see how well each works in this > not uncommon situation. My box of ratcheting wrenches dumped over a while > back and of course ended up in the bilge in salt water. No more ratcheting > happening there. > As to my real point- I had heard about 50-50 acetone ATF a long time ago as a > penetrant so I made some up to try for this experiment, but found that the > two are not miscible and phase separate almost immediately. Is that expected > and if so, which phase for the bolt? Dave > > > Aries > 1990 C&C 34+ > New London, CT > > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com