How hard is it to add jellyfish genes to people? I have heard of glowing rabbits and glowing fish made this way. I was thinking glowing crew would be easy to keep track of at night. Possible? Easy to do with tools at hand or do I need to buy something? I have a line on where to get jellyfish already...
Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Steve Thomas via CnC-List Sent: Thursday, March 12, 2015 5:23 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Genetic Engineering Sounds perfect to me. ----- Original Message ----- From: David Knecht via CnC-List<mailto:cnc-list@cnc-list.com> To: Rick Taillieu<mailto:rtaill...@eastlink.ca> ; CnC CnC discussion list<mailto:cnc-list@cnc-list.com> Sent: Thursday, March 12, 2015 17:06 Subject: Re: Stus-List Genetic Engineering Winch grinding, mast climbing, bottom cleaning, anchor hauling .... Enhanced Foredeck Cow? Dave On Mar 12, 2015, at 4:54 PM, Rick Taillieu via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Like maybe an enhanced foredeck cow? "Hello Dr Moreau." Rick Taillieu Nemesis '75 C&C 25 #371 Shearwater Yacht Club Halifax, NS. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent: March-11-15 23:45 To: David Knecht; CNC CNC Subject: Re: Stus-List Tool recommendation hmmmm... Genetic engineering.... The possibilities...the possibilities... David F. Risch (401) 419-4650 (cell) ________________________________ Date: Wed, 11 Mar 2015 22:41:58 -0400 To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Subject: Re: Stus-List Tool recommendation From: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> I never cease to be amazed by the information I get from this list. This group has an amazing array or talents and experiences, not just in sailing but also in engineering, metallurgy, mechanics, chemistry etc. etc. The only engineering I can provide advice on is genetic engineering and I suspect there are not going to be a lot of questions on that topic. Sigh! I will be sure to report back on tools and bolts when I find what gets this one off. I may buy a few wrenches just to see how well each works in this not uncommon situation. My box of ratcheting wrenches dumped over a while back and of course ended up in the bilge in salt water. No more ratcheting happening there. As to my real point- I had heard about 50-50 acetone ATF a long time ago as a penetrant so I made some up to try for this experiment, but found that the two are not miscible and phase separate almost immediately. Is that expected and if so, which phase for the bolt? Dave Aries 1990 C&C 34+ New London, CT <image001.png> _______________________________________________ Email address: CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ________________________________ No virus found in this message. Checked by AVG - www.avg.com<http://www.avg.com/> Version: 2015.0.5646 / Virus Database: 4306/9270 - Release Date: 03/10/15 _______________________________________________ Email address: CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com Aries 1990 C&C 34+ New London, CT [cid:4073BE72-4704-4EA7-8EBA-B73B833F502B] ________________________________ _______________________________________________ Email address: CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com