Hi Josh,
     Is the rudder shaft exposed under the deck (I haven't crawled down
there yet), where you can clamp the bronze arm?
Gary

~~~~~~~_/)~~~~~~


On Tue, Jul 7, 2015 at 12:35 PM, Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:

> Sea Hawk came with a simrad package already installed.  There is a shelf
> which appears to be 3/4" plywood encapsulated and glassed to the hull under
> the stbd propane locker.  The hydraulic piston is mounted to the shelf and
> drives a bronze arm attached to the rudder shaft.  The feedback positionner
> is mounted to an additional shelf on the port side of the rudder sleeve and
> the linkage attaches to the same bronze arm.  Right now all I have are
> pictures of the bronze arm.  The arm is a standard piece which can be
> bought on defender.
>
> https://
> <https://drive.google.com/folder/d/0B8pEh5lnvP1yQWIyanRiTzBKRlk/edit>
> drive.google.com
> <https://drive.google.com/folder/d/0B8pEh5lnvP1yQWIyanRiTzBKRlk/edit>
> /folder/d/0B8pEh5lnvP1yQWIyanRiTzBKRlk/edit
> <https://drive.google.com/folder/d/0B8pEh5lnvP1yQWIyanRiTzBKRlk/edit>
>
> Josh Muckley
> S/V Sea Hash
> 1989 C&C 37+
> Solomons, MD
> I just bought a 37 Plus and want to install a below deck autopilot.  Has
> anyone done this?  I am interested in the details of how (and where) to
> mount the ram.  Pictures would be wonderful.
>
> Thanks,
> Gary
> S/V High Maintenance
> 1990 C&C 37 Plus
> East Greenwich, RI, USA
> ~~~~~~~_/)~~~~~~
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to