I'll take the spare parts but I'd also recommend getting it fixed. A local machinist did mine for me. Here are some pictures.
https://drive.google.com/folder/d/0B8pEh5lnvP1yZHVtUmhnX2xFR2s/edit Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Oct 26, 2015 9:25 AM, "Tim Goodyear via CnC-List" <cnc-list@cnc-list.com> wrote: > Hi all, > > I have a Barient 19ST, but it has a small problem... The boat yard > dropped the line stripper overboard when servicing the winch a couple of > years back. It too me up to now to get in touch with Allen Hutton at > Australian Winch PTY and that part would have to be fabricated @$375! Does > anyone have any use for any spare parts before I throw the rest away? > > Thanks, > > Tim > > > On Wed, Sep 9, 2015 at 12:00 PM, S Thomas via CnC-List < > cnc-list@cnc-list.com> wrote: > >> The self tailing version of a Barient 18 is a Barient 19, and I would >> like to find them too. >> They are a very useful size, in high demand, and don't come up for sale >> very often. >> >> Steve Thomas >> >> ----- Original Message ----- >> *From:* Kevin Driscoll via CnC-List <cnc-list@cnc-list.com> >> *To:* cnc-list@cnc-list.com >> *Cc:* Kevin Driscoll <kevindrisc...@gmail.com> >> *Sent:* Wednesday, September 09, 2015 10:09 >> *Subject:* Re: Stus-List Barient ST 32's >> >> I am still looking for a Barient 18 self tailer or similar, if anyone >> knows of one. >> >> Kevin >> >> On Tue, Sep 8, 2015, 6:02 PM Paul Baker via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> I fitted them to my 24 and they worked fine, were a struggle to get on >>> but that meant they never slipped. >>> Cheers >>> Paul >>> >>> ------------------------------ >>> To: cnc-list@cnc-list.com >>> Date: Tue, 8 Sep 2015 17:08:15 -0300 >>> >>> Subject: Re: Stus-List Barient ST 32's >>> From: cnc-list@cnc-list.com >>> CC: rtaill...@eastlink.ca >>> >>> >>> I have them on my 25 and they work great. They came on a pair of >>> Barient 18s that I traded for another pair of winches I had and some >>> splicing jobs. >>> >>> I don’t know what size they are but they almost look a size too small >>> for the winches, maybe that’s why I haven’t had the slippage problems that >>> some people have had. There is no way I could get my normal sheets in the >>> outer groove but my light air ones do fit. I use 5/16” sheets and the key >>> is to get three full wraps on the winch then grind it in to jam the top >>> wrap against the bottom of the Wincher, if I don’t do that the sheet will >>> back off. I like them because you can take in the majority of the sheet >>> before the load comes on then put on the third wrap and finish trimming in >>> the sail with one hand, great for single handed sailing. I still have to >>> deal with the sheet as it comes off the winch but I can crank it in a >>> couple turns before it gets around to the front of the winch, if you have >>> someone to tail this is a non-issue. >>> >>> >>> >>> >>> >>> Rick Taillieu >>> >>> Nemesis >>> >>> '75 C&C 25 #371 >>> >>> Shearwater Yacht Club >>> >>> Halifax, NS. >>> >>> >>> >>> >>> >>> >>> >>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Marek >>> Dziedzic via CnC-List >>> *Sent:* September-07-15 19:16 >>> *To:* C&C List >>> *Cc:* Marek Dziedzic >>> *Subject:* Re: Stus-List Barient ST 32's >>> >>> >>> >>> I had them on my C&C 24 and I could not make them to work. I removed >>> them. >>> >>> >>> >>> But ymmv. >>> >>> >>> >>> Marek >>> >>> >>> >>> >>> >>> >>> >>> Sent from my Samsung device over Bell's LTE network. >>> >>> >>> >>> -------- Original message -------- >>> From: David Knecht via CnC-List <cnc-list@cnc-list.com> >>> Date: 2015-09-07 18:07 (GMT-05:00) >>> To: CnC CnC discussion list <cnc-list@cnc-list.com> >>> Cc: David Knecht <davidakne...@gmail.com> >>> Subject: Re: Stus-List Barient ST 32's >>> >>> What about $50 for Winchers ( >>> http://www.defender.com/product3.jsp?path=-1%7C118%7C2358547%7C2358555&id=899493 >>> <http://www.defender.com/product3.jsp?path=-1%7c118%7c2358547%7c2358555&id=899493>)? >>> I am considering trying one for one of my cabin top small secondaries. I >>> have read that they work. Dave >>> >>> >>> >>> Aries >>> >>> 1990 C&C 34+ >>> >>> New London, CT >>> >>> >>> >>> >>> On Sep 7, 2015, at 5:05 PM, Dennis C. via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>> >>> >>> Pairs of used self tailers on eBay go for $1000-1800 depending on size. >>> (There's a pair of 60 ST's out there now for $1700.) >>> >>> Winchmates are ~$550 each. That's $1100 a pair. >>> >>> Good used non-self tailers sell for $300-800 on eBay depending on size >>> and condition. >>> >>> I upgraded Touche's primary, secondary and cabin top winches from alloy >>> to chrome bronze. Net cost for 2 Barlow 28's, 2 Barlow 26's and 2 >>> stainless Barient 22's (all used non ST's) was around $600. Paid $1100 for >>> the "new" ones and sold two pairs of the old ones on eBay for $500 and >>> tossed a pair of 28's in the dumpster. >>> >>> >>> >>> Just saying.... >>> >>> Dennis C. >>> >>> >>> >>> On Mon, Sep 7, 2015 at 3:13 PM, Harry Hallgring via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>> Bill, >>> >>> Yes, that is probably what I will do for my primaries. >>> >>> Harry >>> >>> Sent from my iPad >>> >>> >>> On Sep 7, 2015, at 11:07 AM, Bill Coleman via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>> These? >>> >>> >>> >>> http://www.winchmate.com/store.html >>> >>> >>> >>> >>> >>> >>> >>> Bill Coleman >>> >>> C&C 39 >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> ------------------------------ >>> >>> No virus found in this message. >>> Checked by AVG - www.avg.com >>> Version: 2015.0.6125 / Virus Database: 4419/10600 - Release Date: >>> 09/08/15 >>> >>> _______________________________________________ Email address: >>> CnC-List@cnc-list.com To change your list preferences, including >>> unsubscribing -- go to the bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> ------------------------------ >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
