Brian, Welcome aboard the cnc-list.
Is it possible the rod is only threaded on the exposed ends allowing it to be pressed out? Martin DeYoung Calypso 1971 C&C 43 Seattle [Description: Description: cid:D1BF9853-22F7-47FB-86F2-4115CE0BAF2F] From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian Fry via CnC-List Sent: Friday, December 11, 2015 3:23 PM To: cnc-list@cnc-list.com Cc: Brian Fry Subject: Stus-List Fwd: Auto pilot clamp, threaded rod. Hello, my name is Brian. I recently bought La Neige, a 1993 37/40xl. I am in the Chesapeake. http://i.imgur.com/5faMwZ9.jpg The link is to a picture of my C&C 37/40 auto pilot clamp, where it attaches to the rudder shaft. The threaded rod has no bolt head to unscrew the rod. Has anyone dealt with this issue? I need to drop my rudder, and this is not allowing that to happen. .
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
