Josh, I'm wondering if all 37 Pluses have a full length keyway, or only boats with the factory autopilot installation.
Gary S/V High Maintenance '90 C&C 37 Plus East Greenwich, RI, USA ~~~~~~~_/)~~~~~~ On Sat, Dec 12, 2015 at 5:56 PM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Gary, > > Autopilot was already there. > > Keyway goes almost the full length of the rudder stock. > > I think this may have been a factory install since the platform in Brian's > boat looks exactly like mine. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Dec 12, 2015 5:02 PM, "Gary Russell via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> Josh, >> Did you install the autopilot or a PO? If you installed it was the >> rudder cut out when you got it and did the shaft have a keyway already cut >> in it. >> >> Gary >> S/V High Maintenance >> '90 C&C 37 Plus >> East Greenwich, RI, USA >> >> ~~~~~~~_/)~~~~~~ >> >> >> On Fri, Dec 11, 2015 at 6:38 PM, Josh Muckley via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> I've removed my rudder arm and it looked nothing like that. It looks >>> like you are looking at the back side. The 4 bolts accessible from the >>> front are all you need to remove. >>> >>> https://drive.google.com/folder/d/0B8pEh5lnvP1yZU1hczd0QlNEOWc/edit >>> >>> https://drive.google.com/folder/d/0B8pEh5lnvP1yVUdWUDNxVGFUcDA/edit >>> >>> https://drive.google.com/folder/d/0B8pEh5lnvP1yQWIyanRiTzBKRlk/edit >>> >>> Josh Muckley >>> S/V Sea Hawk >>> 1989 C&C 37+ >>> Solomons, MD >>> On Dec 11, 2015 6:23 PM, "Brian Fry via CnC-List" <cnc-list@cnc-list.com> >>> wrote: >>> >>>> Hello, my name is Brian. I recently bought La Neige, a 1993 37/40xl. >>>> I am in the Chesapeake. >>>> >>>> http://i.imgur.com/5faMwZ9.jpg >>>> >>>> The link is to a picture of my C&C 37/40 auto pilot clamp, where it >>>> attaches to the rudder shaft. The threaded rod has no bolt head to unscrew >>>> the rod. >>>> Has anyone dealt with this issue? I need to drop my rudder, and this is >>>> not allowing that to happen. >>>> . >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com