Gary, Autopilot was already there.
Keyway goes almost the full length of the rudder stock. I think this may have been a factory install since the platform in Brian's boat looks exactly like mine. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Dec 12, 2015 5:02 PM, "Gary Russell via CnC-List" <cnc-list@cnc-list.com> wrote: > Josh, > Did you install the autopilot or a PO? If you installed it was the > rudder cut out when you got it and did the shaft have a keyway already cut > in it. > > Gary > S/V High Maintenance > '90 C&C 37 Plus > East Greenwich, RI, USA > > ~~~~~~~_/)~~~~~~ > > > On Fri, Dec 11, 2015 at 6:38 PM, Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I've removed my rudder arm and it looked nothing like that. It looks >> like you are looking at the back side. The 4 bolts accessible from the >> front are all you need to remove. >> >> https://drive.google.com/folder/d/0B8pEh5lnvP1yZU1hczd0QlNEOWc/edit >> >> https://drive.google.com/folder/d/0B8pEh5lnvP1yVUdWUDNxVGFUcDA/edit >> >> https://drive.google.com/folder/d/0B8pEh5lnvP1yQWIyanRiTzBKRlk/edit >> >> Josh Muckley >> S/V Sea Hawk >> 1989 C&C 37+ >> Solomons, MD >> On Dec 11, 2015 6:23 PM, "Brian Fry via CnC-List" <cnc-list@cnc-list.com> >> wrote: >> >>> Hello, my name is Brian. I recently bought La Neige, a 1993 37/40xl. >>> I am in the Chesapeake. >>> >>> http://i.imgur.com/5faMwZ9.jpg >>> >>> The link is to a picture of my C&C 37/40 auto pilot clamp, where it >>> attaches to the rudder shaft. The threaded rod has no bolt head to unscrew >>> the rod. >>> Has anyone dealt with this issue? I need to drop my rudder, and this is >>> not allowing that to happen. >>> . >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
