At some point you may apply so much torque that you shear off the existing
screws holding the fitting to the deck.  Beware!

 

Jake

 

Jake Brodersen

C&C 35 Mk-III "Midnight Mistress"

Hampton VA

 

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via
CnC-List
Sent: Monday, June 6, 2016 13:43
To: CNC CNC <cnc-list@cnc-list.com>
Cc: David <davidrisc...@msn.com>
Subject: Re: Stus-List Deck Waste fitting dilemma

 

FWIW:

Perhaps one more try with PB Blaster?

Unscrew fitting and twist the fitting off of the hose?

Tap into the cap holes and screw in some substantial bolts...use a large
lever to persuade it off?

Worse case unscrew the fitting, cut hose where you can see it and pull the
whole dang thing out.  Of course that necessitates you replacing the whole
hose.   Not a bad thing (especially when I am not the one doing it!).

Good luck.

David F. Risch
1981 40-2
(401) 419-4650 (cell)



_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to