Stevan:
This was the replacement part I bought:
http://ca.binnacle.com/Plumbing-&-Pumps-Toilets/c31_209/p6899/ITT-TWIST-&-LOCK-TOILET-PUMP-ASSEMBLY-29040-3000/product_info.html
Rob Abbott
On 2016-07-26 3:50 PM, Stevan Plavsa via CnC-List wrote:
I have a similar problem with my jabsco head. It was a brand new
replacement for the original that I installed about 4 years ago. The
other night we were sleeping aboard and I got up in the middle of the
night for a bio break and lo and behold, the bowl was full! Right to
the rim but not overflowing! Lucky me, I thought, that it didn't sink
the boat!
Well being the middle of the night my head wasn't totally screwed on.
Of course, the bowl had been overflowing quite a bit and the bilge was
full to the brim! (I had turned off the bilge pump earlier that day
for some reason)... anyway .. long story short, thanks for recounting
your experience. I now know what I have to do and what will be
involved so I'm a whole lot less worried about it :)
Replacing the head and hoses was the filthiest job I've ever done and
I'm glad not to have to repeat (much) of it.
Steve
Suhana, C&C 32
Toronto
On Tue, Jul 26, 2016 at 2:40 PM, Pete Shelquist via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Did it fix the original problem?
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com
<mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of robert
via CnC-List
Sent: Tuesday, July 26, 2016 1:29 PM
To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
Cc: robert
Subject: Stus-List Plumbing Related
Recently, on port tack, my 'head bowl' was filling and overflowing
with sea
water.....wasn't completely sure whether it was a faulty 'choker
valve' or
the valve in the 'shut off' lever....had to be one or the other,
probably a
faulty valve in the 'shut off' switch.
Trip to Binnacle to check out possible solutions to the
problem.....simplest
way to address it was to get a whole new Jabsco pump assembly for
$100.
One hour labor in total install new pump..... disconnect 3 hoses
from old
pump, 4 screws in the base, screw new pump into place, connect the 3
hoses.....one of the easiest boat jobs I have experienced.
FYi for anyone having a similar problem.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
_______________________________________________
This list is supported by the generous donations of our members.
If you like
what we do, please help us pay for our costs by donating. All
Contributions
are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members.
If you like what we do, please help us pay for our costs by
donating. All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
