Bill &/or Fred,
The steaming / foredeck sounds like a great light and will probably get one. Have had 2 of the Forespar units and the foredeck light dies within a couple years. >From one of the posted reviews it sounds like the electrical connection is >made with butt connectors. Did either of you provide any strain relief on the >wire or is the weight of the wire hanging on the 3 connections? Thanks, Brian From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Tuesday, August 09, 2016 12:04 PM To: cnc-list@cnc-list.com Cc: Bill Coleman <colt...@verizon.net> Subject: Re: Stus-List LED masthead lights and steaming/deck light I will vouch for the deck/steaming light, I got one this spring on Fred’s recommendation, and it is sweet! Seems to be sealed. Very bright. Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Tuesday, August 09, 2016 9:37 AM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Frederick G Street Subject: Re: Stus-List LED masthead lights and steaming/deck light Joel — I replaced all my mast lighting this past winter with products from MarineBeam: http://marinebeam.com/led-tri-color-navigation-and-all-around-anchor-light/ http://marinebeam.com/led-masthead-foredeck-combination-light/ I’m very pleased with the quality of the gear, and the installation went well. I pulled new 16AWG wire for everything to the bottom of the mast, then pulled a new common 12AWG ground from there to the panel, along with 16AWG runs for the hots. The new lights are far brighter than the old ones, and seem like they’ll do well in the weather. At the same time, I pulled new VHF and cell repeater antenna runs, and installed new antennas at the masthead; and I also installed an LED Windex light wired with my compass light switch. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI On Aug 9, 2016, at 8:21 AM, Joel Aronson via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: It will be too hot in Annapolis for me this weekend, so I want to start on my boat show shopping list. I want to replace my anchor light with an LED anchor/Tri combo and replace the steaming light with a steaming/deck light. Any favorites? Any dogs to avoid? -- Joel 301 541 8551 _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
