http://www.perko.com/catalog/category_products/cabinet_hardware-hinges/
On Mon, May 15, 2017 at 7:57 AM, Indigo via CnC-List <cnc-list@cnc-list.com> wrote: > Has anyone with a 35mkIII replaced the three hinges that are attached to > the plexiglass cover for the winch handle (?) tray that is just forward of > the main hatch. I have the hinges off the boat, and though they are stamped > Perko Zinc there is no serial / model number. What I thought were > equivalents from West Marine do not have the same hole pattern and thus do > not line up with the holes in the fibreglass or the plexi. I would rather > not have to replace the plexi just because of the hinges. If anyone has > the model number of the original Perko hinges, I would be most grateful. > > -- > Jonathan > Indigo C&C 35III > SOUTHPORT CT > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!