The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)

Can't recall how the hood side of the hinges are attached, but seem to remember 
that they were attached with nut and bolt, but seem to remember that nut just 
spun when I tried to replace a broken hinge in the past requiring removal of 
the hood. I plan to epoxy the nuts in place so broken hinges can be replaced 
more easily in the future!

--
Jonathan
Indigo C&C 35III
SOUTHPORT CT

> On May 15, 2017, at 21:02, Jim Watts via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> Yes, I still have one as a backup. 
>  
> That hinge stock number is actually 0951DP1CHR.
> 
> Perko also makes the same hinge in zinc, which is what C&C used in the first 
> place, at least on my boat. Part number for that is 0808DP0CHR.
> 
> The zinc ones are way cheaper than the bronze ones, but will definitely decay 
> faster in salt water. I went cheap, I can replace these about five times for 
> the cost of the bronze ones. 
> 
> Jim Watts
> Paradigm Shift
> C&C 35 Mk III
> Victoria, BC
> 
>> On 15 May 2017 at 09:44, Indigo via CnC-List <cnc-list@cnc-list.com> wrote:
>> Thanks for this. I contacted Perko and they were able to give me the exact 
>> dimensions / hole placements etc and gave me a part number (0851DP1CHR). 
>> Found it a local, well stocked marine store shout out to Rex Marine in 
>> Norwalk CT!  - NOT West! and confirmed by comparing old to New that is the 
>> same!  Only downside is that they come two to a pack and I need 3!!
>> 
>> --
>> Jonathan
>> Indigo C&C 35III
>> SOUTHPORT CT
>> 
> 
> _______________________________________________
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to