There is a 40 here with a wing keel, maybe 5 - 6 foot draft.
Regards,
Bill Coleman C&C 39, Erie
-------- Original message --------
From: "Della Barba, Joe via CnC-List" <cnc-list@cnc-list.com>
Date: 5/30/17 16:43 (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: "Della Barba, Joe" <joe.della.ba...@ssa.gov>
Subject: Re: Stus-List C&C 40 for sale
Sadly a 7 or 8 foot draft boat is very hard to sell to a non-racer here. Too
many places you can never go – including my slip!
Joe
Coquina
C&C 35 MK I
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Bruno Lachance via CnC-List
Sent: Tuesday, May 30, 2017 4:33 PM
To: cnc-list@cnc-list.com
Cc: Bruno Lachance <bruno_lacha...@hotmail.com>
Subject: Re: Stus-List C&C 40 for sale
I saw a few C&Cs with draft réductions around here. Mars metal, who i
understand produced the keels for most of our boats, have the templates, datas
and know how to produce a bulb in two sections
that you can bolt to the reduced keel and fair. A kind of DIY kit. You can cut
the keel with a chainsawand they will calculate the weight of the bulb to
compensate for the loss. they should also advise you if you are going too far,
from what i heard they have
a good knowledge of our boats.
https://marskeel.com/
MarsKeel |Production
Lead Keels for the Sailboat Industry
marskeel.com
For 35 years Mars Keel Technology has united its passion for sailing & vast
technical experience to supply quality
keels to builders & sailors worldwide
The shipping will be expensive!
Bruno Lachance
Bécassine, 1987 33 mkII (will splash this thuesday!)
New-Richmond, Qc
De : CnC-List <cnc-list-boun...@cnc-list.com>
de la part de Danny Haughey via CnC-List <cnc-list@cnc-list.com>
Envoyé : 30 mai 2017 16:11
À : cnc-list@cnc-list.com
Cc : Danny Haughey
Objet : Re: Stus-List C&C 40 for sale
The yard I was at in westport did it on a C&C 41 I looked at
On 5/30/2017 4:10 PM, Andrew Burton via CnC-List wrote:
The guy with the 40 for sale in the Rio Dulce did it...with success he says.
Andy
C&C 40
Peregrine
Andrew Burton
61 West Narragansett Ave
Newport, RI
USA 02840
+401 965 5260
On May 30, 2017, at 15:59, Della Barba, Joe via CnC-List
<cnc-list@cnc-list.com> wrote:
Anyone know how hard it is to saw a foot or two off the keel?
6 feet is the absolute max for me.
Joe
Coquina
From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Joel Aronson via CnC-List
Sent: Tuesday, May 30, 2017 11:24 AM
To: cnc-list@cnc-list.com
Cc: Joel Aronson <joel.aron...@gmail.com>
Subject: Stus-List C&C 40 for sale
Saw this listing:
https://annapolis.craigslist.org/boa/6153505462.html
Don't know the boat.
--
Joel
301 541 8551
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
