My 1972 30 MK I (hull #7) has the same metal brackets, which go through slots 
in a piece of plywood that slides inboard to make a wider berth. The plywood 
piece has a piece of trim along the inboard edge that acts as a fiddle to hold 
the cushion in place. I'll try to remember to snap a couple pictures tomorrow 
night to post for you. 

Cheers, 
Randy 

----- Original Message -----

From: "Joseph Bognar via CnC-List" <cnc-list@cnc-list.com> 
To: "cnc-list" <cnc-list@cnc-list.com> 
Cc: "Joseph Bognar" <jbog...@sympatico.ca> 
Sent: Tuesday, July 11, 2017 7:13:07 PM 
Subject: Re: Stus-List C&C 30 MK1 General Questions 

I would replace the water tank and not take any chances with it . Some photos 
of your sette would help also. My 30 is of the 1979 vintage . I have an extra 
piece of plywood on top of the sette . It slides between the metal brackets and 
pulls out to make the bed a bit bigger to lay on . 

Sent from Joe Bognar 


On Jul 11, 2017, at 7:59 PM, Steven A. Demore via CnC-List < 
cnc-list@cnc-list.com > wrote: 






Need some help/advice from some more experienced C&C people. I am rebuilding a 
’73 30 MK1 project boat, that was started a few years ago by another person and 
abandoned along the way. I am focused on the settee area right now. First, I 
think I can get the mold cleaned out of the water tank, but it looks like there 
are some fine cracks in the bottom. Is there something that I can do to seal it 
up (paint, liner, ?) that would be safe for potable water? 



Second, the settee itself has a couple of metal brackets on the top that would 
keep cushions from sitting flat. Can somebody tell me how the settee goes 
together, i.e. is there a board on top or something? A picture might be helpful 
as well, since I am going to have to build whatever goes in there. 



I’m sure that I’ll have a lot more questions as this project commences, so 
thanks in advance! 


Steve 



SV Doin’ It Right 
1973 C&C 30 MK1 
Pasadena, MD 





<blockquote>

_______________________________________________ 

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to: 
https://www.paypal.me/stumurray 

All Contributions are greatly appreciated! 

</blockquote>

_______________________________________________ 

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to: 
https://www.paypal.me/stumurray 

All Contributions are greatly appreciated! 

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to