That looks like a standard low-profile Lewmar track/car and it looks like it has the internal blocks to make it adjustable. Add a suitable block on the fore and aft ends of the track, run a line appropriately and eventually to the cockpit and you have adjustable cars. Mind that you face the choice of easy adjustment (lot of purchase and line--say 6:1) or more difficult adjustment (less purchase and line say 3:1). Except for the blocks at the track ends, I don't see that you need new cars. The adjustable cars on my boat look identical to yours--all I did was add more purchase with blocks at the end of the track. Charlie Nelson 1995 C&C 36XL/kcb Water Phantom cenel...@aol.com
-----Original Message----- From: Bruce Whitmore via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Bruce Whitmore <bwhitm...@sbcglobal.net> Sent: Tue, Dec 19, 2017 5:42 pm Subject: Re: Stus-List Adjustable Genoa Cars, 1994 C&C 37/40+ Here is a photo of the car: https://www.dropbox.com/s/d7xjokgr6ndss8u/Track%20Car.jpg?dl=0 Here is a photo of the end of the track: https://www.dropbox.com/s/hj5gygo52qf25p9/Track%20Photo%20%231.jpg?dl=0 And here is a photo of the track: https://www.dropbox.com/s/80aoxpg4igj3pmv/Track%20Photo%20%233.jpg?dl=0 Can anyone here suggest a solution for retrofitting adjustable cars to this track? Garhauer was only $430 for the full kit (both sides), but the cars don't fit the track, and they say they can't match it. Have any of you had luck with getting Garhauer to make a car to match this track? I really don't want to spend more than twice the Garhauer price. I'm not going to race, and I need $1,000 more than I need adjustable cars... Thanks! Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
