Pictures Bill, if you could please. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD
On Feb 11, 2018 9:02 AM, "coltrek via CnC-List" <cnc-list@cnc-list.com> wrote: > Or you can take a leap of faith, and cut a hole in the low spot of your > deck, and put a little drain in there. I noticed all the newer models had > deck drains in them, so I popped two in. I routed the drain hoses back to > a T into the cockpit drains. > > Bill Coleman > C&C 39 > > > -------- Original message -------- > From: bwhitmore via CnC-List <cnc-list@cnc-list.com> > Date: 2/11/18 08:19 (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: bwhitmore <bwhitm...@sbcglobal.net> > Subject: Re: Stus-List Toe rail water drain > > I have used natural sponge cut & inserted in strategic spots for nearly 20 > years. Really works well. Never tried the rope. > > > > Sent from Samsung tablet. > > > -------- Original message -------- > From: Jake Brodersen via CnC-List <cnc-list@cnc-list.com> > Date: 2/10/2018 5:02 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: captain_j...@cox.net > Subject: Re: Stus-List Toe rail water drain > > Christian, > > > > Water pooling on the side decks is an issue, along with the black streaks > that seem to radiate from the toe rail. I have seen others use small > pieces of sponge or cotton rope to let the water wick over the side. I > would certainly try this before cutting into the toe rail. Give it a shot. > > > > Jake > > > > > > *Jake Brodersen* > > *C&C 35 Mk-III “Midnight Mistress”* > > *Hampton VA* > > [image: cid:image001.png@01D2F43E.567E4070] > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *Christian > Planton via CnC-List > *Sent:* Saturday, February 10, 2018 16:03 > *To:* cnc-list@cnc-list.com > *Cc:* Christian Planton <plant...@wiltonps.org> > *Subject:* Stus-List Toe rail water drain > > > > Hello everybody, > > > > I am going to rebed my deck hardware. When I do I'm thinking of rebedding > the toe rail. Has anybody cut drain points into it so the water drains out. > I was even thinking of cutting 1/8" plastic strips and in a couple of > places "Lifting up" the toe rail to create a path for the water to drain. > > > > I get puddles aft on both sides of the cockpit. > > > > Any thoughts would be greatly appreciated. > > > > ChristianPlanton > > Peer Gyth > > C&C 34 1980 > > Saugatuck, CT > > > > > > Wilton Public Schools is transitioning e-mail systems. Effective > immediately, please update your contact list to reflect the new e-mail > address plant...@wiltonps.org. > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray