My plan is to paint the acrylic underside with VHT Silicone header spray paint. Saw this recommended on a forum somewhere . Anyone try this? Good or bad idea?
From: Chuck Saur <cssau...@gmail.com> > To: cnc-list@cnc-list.com > Cc: > Bcc: > Date: Tue, 13 Mar 2018 10:00:35 -0400 > Subject: Stus-List Reinstalling plexi windows...again. > Happy spring?? I recall someone commented on priming and/or painting the > smoke-tint plexiglass edge areas, prior to installing, to hide the the VHB > and Dow 795, so all does not show through the smoke plexi against the white > cabin side along those edge areas. > > I have the window dug out, whew, and cleaned up with Mechanica silicone > remover and mineral spirits. I actually lost only three patches of knuckle > skin. I have also sanded the receiving perimeter of the plexi where it will > make contact with the tape and/or paint. > > I could not find the mention of the painting step in the archive. Has > anyone painted this and have advice? I purchased a can of Krylon High-bond > plastic paint in flat black. It's waiting in the barn... Thoughts? > > > *Chuck Saur* > Morning Sky > C&C 35-3 > > > > > > ---------- Forwarded message ---------- > From: Frederick G Street <f...@postaudio.net> > To: cnc-list@cnc-list.com > Cc: > Bcc: > Date: Tue, 13 Mar 2018 09:19:49 -0500 > Subject: Re: Stus-List Reinstalling plexi windows...again. > Chuck — I used the Krylon Fusion flat black spray paint around the edges > of my windows, and it worked well. > > — Fred > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > > _______________________________________________ > CnC-List mailing list > CnC-List@cnc-list.com > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
