|
Ditto. The Kylon Fusion flat black worked well for me.
-
On 2018-03-13 11:19 AM, Frederick G
Street via CnC-List wrote:
Chuck — I used the Krylon Fusion flat black spray paint around the
edges of my windows, and it worked well.
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979
C&C Landfall 38) -- on the hard in Bayfield,
WI :^(
Happy
spring?? I recall someone commented on priming and/or
painting the smoke-tint plexiglass edge areas, prior to
installing, to hide the the VHB and Dow 795, so all does
not show through the smoke plexi against the white cabin
side along those edge areas.
I
have the window dug out, whew, and cleaned up with
Mechanica silicone remover and mineral spirits. I
actually lost only three patches of knuckle skin. I have
also sanded the receiving perimeter of the plexi where
it will make contact with the tape and/or paint.
I
could not find the mention of the painting step in the
archive. Has anyone painted this and have advice? I
purchased a can of Krylon High-bond plastic paint in
flat black. It's waiting in the barn... Thoughts?
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
|
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
