Ok, I think I'm going to go with the Bronze Silicon screws given the the
very moist environment. I am actively trying to chase down all the
sources of water in the bilge but, until then... As I understand it, SS
doesn't really like like an environment that could be wet with little
oxygen and suffers crevice corrosion.
I have another question in reference to this same project. I'll be
adding a solid 1/2 x 1 piece of teak to the edge of the T&H plywood to
frame out the bilge opening. My plan is to epoxy it there and finish
nail it in place. I can't seem to find any bronze finish nails. Would
anyone have any advice as to the type of nail and material. Currently
I'm thinking my only option is a stainless finish nail. My question is
more of what size, should I pre-drill to avoid splitting the solid teak
edging? Actually any insight or advice at all will be appreciated.
After this project I plan on going to the Salon to get my hair done and
then I reckon I'll jump on my mustang, called Ol Paint to mosey on over
to the Saloon for a whiskey and few hands of poker...
Danny
On 3/28/2018 11:01 AM, Ken Heaton via CnC-List wrote:
I think you'd be better off with Robertson, instead of the #2 Phillips
drive.
Ken H.
On 28 March 2018 at 09:19, Danny Haughey via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
HI, Has anyone used these screws? I was thinking of putting my
salon back together with them.
Thanks,
Danny
_______________________________________________
Thanks everyone for supporting this list with your contributions.
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray