Danny,
Call me after the salon and before you jump on the mustang. I'll join you for poker and whiskey... How is paint-job-parte-deux going? ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Danny Haughey via CnC-List <cnc-list@cnc-list.com> Sent: Monday, April 2, 2018 10:41 AM To: cnc-list@cnc-list.com Cc: Danny Haughey Subject: Re: Stus-List SHARX™ SCREWS FOR MARINE USE Ok, I think I'm going to go with the Bronze Silicon screws given the the very moist environment. I am actively trying to chase down all the sources of water in the bilge but, until then... As I understand it, SS doesn't really like like an environment that could be wet with little oxygen and suffers crevice corrosion. I have another question in reference to this same project. I'll be adding a solid 1/2 x 1 piece of teak to the edge of the T&H plywood to frame out the bilge opening. My plan is to epoxy it there and finish nail it in place. I can't seem to find any bronze finish nails. Would anyone have any advice as to the type of nail and material. Currently I'm thinking my only option is a stainless finish nail. My question is more of what size, should I pre-drill to avoid splitting the solid teak edging? Actually any insight or advice at all will be appreciated. After this project I plan on going to the Salon to get my hair done and then I reckon I'll jump on my mustang, called Ol Paint to mosey on over to the Saloon for a whiskey and few hands of poker... Danny On 3/28/2018 11:01 AM, Ken Heaton via CnC-List wrote: I think you'd be better off with Robertson, instead of the #2 Phillips drive. Ken H. On 28 March 2018 at 09:19, Danny Haughey via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: HI, Has anyone used these screws? I was thinking of putting my salon back together with them. Thanks, Danny _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray