Omg! Perfect!! 
This is perfect. Thanks so much. Now I just have to figure out where the 
compression release is 😬😳😉
I’ll figure it out. We flushed it with fresh water followed by RV pink anti 
freeze 
Flushing it is a great suggestion
Chris 


Sent from Yahoo Mail for iPhone


On Monday, October 22, 2018, 5:51 PM, svrebeccaleah via CnC-List 
<cnc-list@cnc-list.com> wrote:

Hi Chris, On my girlfriend's boat, she has the same engine. When starting we 
set the throttle to about 1/4 to 1/3 then start cranking. Sometimes I'll engage 
the compression release to get the engine spinning a little faster (about 10 
secs) then release it. Another thing we do is flush the engine with fresh water 
before putting the boat to bed. Hope this helps. 
Doug Mountjoy Sv Rebecca Leah LF39Port Orchard YC. WA




Sent from my T-Mobile 4G LTE Device
-------- Original message --------From: Chris Graham via CnC-List 
<cnc-list@cnc-list.com> Date: 10/22/18 09:38 (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: Chris Graham <sabre28...@yahoo.com> Subject: 
Stus-List diesel engine staring procedure 
I have a quick question about the specifics of starting a Yanmar SB8 single 
cylinder engine. The previous owner also disconnected the kill switch and 
turned off the engine with the key so i want to reattach the cable this spring.
Is there a specific amount of throttle to set it at prior to turning it over? I 
think I remember by old Volvo-Penta had to be positioned at 3/4 open and then 
immediately dropped down to idle once the engine turned over. 
anything special I need to know? No real information out there and the old 
service manuals are pretty much impossible to locate at this point.
Thanks for your suggestionsChris_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray




_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to