I have not heard of anyone using Sikaflex.  I would recommend G-Flex and
follow the prescription in the link below.

https://drive.google.com/file/d/0B8pEh5lnvP1yV1JEN3YxQk1RbHc/view?usp=drivesdk

Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD

On Thu, May 2, 2019, 10:59 PM Shawn Wright via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hello all,
>
> I spent the day wet-sanding the bottom of Callisto and she is nearly ready
> for a coat of paint. I also cut out the old keel joint rubbery sealant, in
> preparation for some Sikaflex 291. I plan to scrub the gap a bit more and
> clean with lacquer thinner before letting dry.
>
> All the through hulls look good, bronze with marelon valves.
>
> I have two depth transducers, one for a Standard Horizon DS30, and the
> other for a Garmin 140 Fishfinder, both working. There is a plug for the
> old B&G speed sensor, but I was pleased to find another newer speed sensor
> in good shape, it appears to be a Garmin like this:
>
> http://www.airmar.com/productdescription.html?id=103
>
> The specs show either a NMEA 2000 or analog cable, but I haven't traced it
> yet to determine which one I have. Of course, the B&G H1000 system I have
> only does NMEA 0183, so I will need a signal converter, I think. I'm
> hesitant to spend any money on the old B&G system until I verify the pieces
> I have actually work though.
>
> Also, the plug for the old B&G sensor is very thin plastic, about 2mm
> thick. I'm thinking of filling the hollow plug with epoxy so it doesn't
> sink the boat if it ever cracks. Or maybe just find a better one? It's 1
> 3/4" diameter.
>
> --
> Shawn Wright
> shawngwri...@gmail.com
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to