Thanks Dennis…I’m afraid I’d be back similar to the Ev-100 Tiller pilot from Raymarine where it would simply be undersized.
And….and I’m operating almost exclusively on the NMEA 2000 Backbone as I move forward. Got me thinking…. > On May 29, 2019, at 1:52 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > > Consider a Simrad TP32 if you have NMEA0183 interfacing. I think the Simrad > pilots are very good. The TP32 has essentially the same control circuit as my > Simrad WP30 Wheel Pilot. The TP32 is self-contained and does not require any > separate components. > > I love my WP30! I’ve got 20 years use out of my WP30 on my 35-1 and it’s > still going strong. (Disclaimer: I put a second WP30 on last month but the > old one was still fine. I keep it as a spare.). The new one drove us 100+ > miles waypoint to waypoint over the weekend without a hiccup. > > My WP30 does steer to course using the integral fluxgate as well as steer to > waypoint and steer to wind angle via NMEA0183 interface. I use a Noland > NMEA0183 multiplexer. > > Used TP32’s can be found on eBay. New ones are under $700. > > Dennis C. > Touché 35-1 #83 > Mandeville, LA > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray