I’ve given up on my Raymarine Ev-100 Tiller pilot. It the motor drive alway’s kicks out and it’s a year old. I’m assuming it’s under-powered for the size of boat I’m asking it to maneuver. My electronics are B&G Triton2’s….looking at the B&G pilot model so that I can utilize my chart plotter, etc. Any experience placing a ram underneath the stern rudder tube deck plate in these models? there’s a location for a pedestal for other models instead of a tiller. I hope to mount it underneath the deck plate but outside of the hull with a arm off of the rudder post below the tiller. I am considering a ram style for the movement.
Thanks James Bibb C&C 34-36R Darwin’s Folly _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray