If ya got that kind of gunk the only real way to get rid of of it is to remove it and clean it proper. I took boiling vinegar and rinse and shook it twice Then rinsed and dried. No gunk
Polishing is a waste of money (or so I read). Sent from my Android. Please forgive typos. Thank you. From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Ted_Relinda--- via CnC-List <cnc-list@cnc-list.com> Sent: Sunday, September 6, 2020 4:47:08 PM To: cnc-list@cnc-list.com <cnc-list@cnc-list.com>; Josh Muckley via CnC-List <cnc-list@cnc-list.com>; C&C List <cnc-list@cnc-list.com> Cc: ted_reli...@yahoo.com <ted_reli...@yahoo.com> Subject: Re: Stus-List Yanmar cutting out at sea? I found the easiest way to fill the racor ,and prime the injectors if needed, is a hand squeeze primer bulb. I put it in the fuel line before the filter. I can change the filter and just fill it back up bleeding the air out on top. Ted SV Ten-Ten '81 40 Punta Gorda ,Fl. Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Sun, Sep 6, 2020 at 11:44, Josh Muckley via CnC-List <cnc-list@cnc-list.com> wrote: _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Ted_Relinda--- via CnC-List <cnc-list@cnc-list.com> Sent: Sunday, September 6, 2020 4:47:08 PM To: cnc-list@cnc-list.com <cnc-list@cnc-list.com>; Josh Muckley via CnC-List <cnc-list@cnc-list.com>; C&C List <cnc-list@cnc-list.com> Cc: ted_reli...@yahoo.com <ted_reli...@yahoo.com> Subject: Re: Stus-List Yanmar cutting out at sea? I found the easiest way to fill the racor ,and prime the injectors if needed, is a hand squeeze primer bulb. I put it in the fuel line before the filter. I can change the filter and just fill it back up bleeding the air out on top. Ted SV Ten-Ten '81 40 Punta Gorda ,Fl. Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Sun, Sep 6, 2020 at 11:44, Josh Muckley via CnC-List <cnc-list@cnc-list.com> wrote: _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray