Another benefit to the squeeze bulb is that if the tank pick up line gets plugged with gunk, the bulb will collapse under the vacuum created. By blowing into the line you can usually clear the blockage. Yum!
Fred Hazzard S/V Fury C&C 44 Portland, Or On Mon, Sep 7, 2020 at 5:24 AM David Risch via CnC-List < cnc-list@cnc-list.com> wrote: > If ya got that kind of gunk the only real way to get rid of of it is to > remove it and clean it proper. I took boiling vinegar and rinse and shook > it twice Then rinsed and dried. No gunk > > Polishing is a waste of money (or so I read). > > Sent from my Android. Please forgive typos. Thank you. > > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of > Ted_Relinda--- via CnC-List <cnc-list@cnc-list.com> > *Sent:* Sunday, September 6, 2020 4:47:08 PM > *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com>; Josh Muckley via > CnC-List <cnc-list@cnc-list.com>; C&C List <cnc-list@cnc-list.com> > *Cc:* ted_reli...@yahoo.com <ted_reli...@yahoo.com> > *Subject:* Re: Stus-List Yanmar cutting out at sea? > > I found the easiest way to fill the racor ,and prime the injectors if > needed, is a hand squeeze primer bulb. I put it in the fuel line before the > filter. I can change the filter and just fill it back up bleeding the air > out on top. > Ted > SV Ten-Ten > '81 40 > Punta Gorda ,Fl. > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sun, Sep 6, 2020 at 11:44, Josh Muckley via CnC-List > <cnc-list@cnc-list.com> wrote: > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of > Ted_Relinda--- via CnC-List <cnc-list@cnc-list.com> > *Sent:* Sunday, September 6, 2020 4:47:08 PM > *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com>; Josh Muckley via > CnC-List <cnc-list@cnc-list.com>; C&C List <cnc-list@cnc-list.com> > *Cc:* ted_reli...@yahoo.com <ted_reli...@yahoo.com> > *Subject:* Re: Stus-List Yanmar cutting out at sea? > > I found the easiest way to fill the racor ,and prime the injectors if > needed, is a hand squeeze primer bulb. I put it in the fuel line before the > filter. I can change the filter and just fill it back up bleeding the air > out on top. > Ted > SV Ten-Ten > '81 40 > Punta Gorda ,Fl. > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sun, Sep 6, 2020 at 11:44, Josh Muckley via CnC-List > <cnc-list@cnc-list.com> wrote: > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
