Another handy tool, is the counter clockwise drill bit. An easy-out kit I bought once came with them, even cobalt!
https://www.mscdirect.com/product/details/05083837?fromRR=Y Bill Coleman Entrada, Erie, PA From: WILLIAM WALKER via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Thursday, January 14, 2021 8:41 AM To: cnc-list@cnc-list.com Cc: WILLIAM WALKER Subject: Stus-List Re: Screw removal I agree with Jeff, likely will be unable to reuse the threaded holes, but I bet the impact driver will remove. I have then drilled, tapped and installed slightly larger machine screw with anti seize. Good luck. Bill Walker -----Original Message----- From: Jeff Nelson via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Jeff Nelson <jhnelso...@gmail.com> Sent: Thu, Jan 14, 2021 07:50 AM Subject: Stus-List Re: Screw removal If those are stainless steel screws in Aluminum without any protection, they've likely welded/corroded themselves to the aluminum. You will likely only get them out with a drill. You will then have to re-tap the holes, or use a threaded insert to remount your spreader. If you do get them off, when you put new in use a lot of never seize compound or teflon to separate the two materials. You might get lucky if you just drill the heads off the screws to get a vice grip on them for more power. I've never had much luck with them tho. Cheers, Jeff Nelson Muir Caileag C&C 30 0549 On 2021-01-14 7:29 a.m., Adam Hayden via CnC-List wrote: Hello I am in the process of ordering new spreaders and the supplier asked to send the old bases so the holes can be properly aligned. The spreader bases are attached by screws. I have soaked with penetrating oil this evening and will soak over night. I will bring a torch over tomorrow. Any other suggestions would be appreciated. I would prefer not to have to drill them out. See the attached link <https://photos.app.goo.gl/RuDjmDNgWMELrcoR6> https://photos.app.goo.gl/RuDjmDNgWMELrcoR6 Thanks Adam C&C 36 Pictou NS Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avast.com Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu