I guess that there is different grades of quality, but I see some seller market there product as Seadeack foam, often those are smaller sheets, maybe leftovers? Anyways maybe I could split the cost and do the benches myself. The shape is simple to cut, but I would need to buy a router for the edges.
We are looking at the light grey 5 mm single layer, no pattern, simple and easier to clean. Still, if I could get an estimate from a lister that as done business with Seadeck or Raptor that would give me confidence to send my patterns. The only product I have seen was from Raptor and was awesome so I tried to contact them by email first, but no reply so far after a week. not very promising... Bruno Lachance Bécassin, C&C 33-2 New-Richmond, Qc Envoyé de mon iPad Le 25 janv. 2021 à 18:54, Kevin Driscoll via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> a écrit : I bought the same stuff off Amazon a few years ago that George referenced above. It was such a nice change and from a grip, comfort, and cooling standpoint. I will say that the grey layer on top is thin and became unbonded to the black substrate below, eventually falling off completely. This may have been from sun/rain exposure over the two years. The black substrate makes up the bulk of the thickness and is the EVA foam I believe. While it is still comfortable and slip resistant, the aesthetics are not ideal. I rubbed off what grey was left and now the aesthetic is a uniform black. I have considered re-applying with a solid color grey or similar and not the faux weathered teak. I can not justify at this time the Raptor Deck expense, but would say that it is a superior product. I do think this budget material would work great down below and would have many benefits. The only caveat being that dust and grit obviously will seek the low point in the profile and so you will probably need a dustbuster handy in lieu of the standard dust pan. KD On Mon, Jan 25, 2021 at 1:37 PM George Cone via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Bruno, I offer this as a thought, I purchased some of this material as a test, planning to remove it and buy the real expensive stuff, because I was concerned how it would hold up under the stress of my dog. An active retriever. I was amazed how good it has worked and in-fact bought some more to finish the job. Take a look on amazon -- CHURERSHINING EVA Teak Decking Sheet for Boat Yacht Marine Floor Carpet Non-Slip and Self-Adhesive Bevel Edge 94.5"x35.4"<https://www.amazon.com/CHURERSHINING-Decking-Marine-Flooring-Adhesive/dp/B07P62SWB4/ref=sr_1_2?dchild=1&keywords=boat+deck+covering&qid=1611610224&sr=8-2> Thanks, George Cone C&C 40 From: Bruno Lachance via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Monday, January 25, 2021 4:26 PM To: 'Stus-List' <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Bruno Lachance <bruno_lacha...@hotmail.com<mailto:bruno_lacha...@hotmail.com>> Subject: Stus-List Seadeck / Raptor deck eva foam for cockpit Hi, The cockpit antiskip is long overdue on our 1987 33-2 and even with really good deck shoes it is now just unsafe. Our plan is to cover the cockpit sole, benches and bridgedeck with 5 mm light grey. The templates are made and both companies (Seadeck and Raptor) do custom work. You send theme the templates and they send you a quote. But before i send them my precious templates, I would like to have a ballpark estimate, anybody on the list that have done the same and could give me a rough estimate. It could be from a C&C 29 to a let's say 37. I have sailed on boats where the cockpit sole was covered with Raptor deck as antiskid. I loved the feel of it and the grip is really good and more comfy. I would prefer this to paint. I know i could also buy a sheet of the same stuff and cut it myself, but i want it to look professional if the price is not outrageous. Thank you! Bruno Lachance Bécassin, C&C 33-2 New-Richmond, Qc Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
