I will have to look into this. If it is possible to program the yellow
button with the silverlight app, then it should be possible for me to do
it with mhgui. Let me take a look at it.
What do you mean by "change boot sequence?"
On Wed, 3 Jul 2013, Demetrio wrote:
WOW, GREAT!!! It works ... but.
All this work I did, I did it to manage my remote in an extended way.
My main goal is to program the yellow button, high-left corner, the only one
programmable button. But I didn't found how to do it.
I find for every device the ability to match a "power" button and a "quick
power" button. the first is usually associated to "power toggle", the second
would be the yellow button but it doesn't seem to be linked to anything.
Example:
I have got a TV without DVB-T, and a mediaplayer DVB-T capable. They are
linked by HDMI cable.
Original myharmony.com site let me choose which devices I can command, so
that when I push the yellow button the remote send a powertoggle signal to
every device I choose.
But, my TV doesn't switch to HDMI input in auto mode, and my mediaplayer
doesn't switch to TV automatically. Then I would like to add the following
sequence to the yellow button:
- AV button on TV
- pause for 3-4 seconds
- AV button on mediaplayer
It would be nice if I'm able to change boot sequence as well.
Is there any way to do that?
Demetrio
2013/7/2 Scott Talbert <s...@techie.net>
On Tue, 2 Jul 2013, Demetrio wrote:
> I'm trying to use concordance with Harmony 300 on Ubuntu 13.04
64bit
> I correctly made the bin, and it should works but... and now?
> I tried to get info about my remote, and it worked. I tried to
dump firmware
> and configuration, but it didn't work, so I don't know how to
begin.
> I also compiled congruity and libconcord, but the problem was
the same.
> i suppose I have to begin with a first configuration file, but
I cannot dump
> it from remote so I don't know what kind of file it needs.
>
> Error message was always the same:
> Failed to dump config: Error while reading from the remote
> Failed with error 3
Hi.
I assume you are just trying to configure your remote? If so, you
will
need to run 'mhgui', which comes with congruity. 'mhgui' interfaces
with
the myharmony web service and will allow you to reconfigure your
remote
and sync the config to it (or you can download the config).
If you are really wanting to dump the existing config file from the
remote, I have a patch available to do so, but Phil hasn't
incorporated it
into concordance yet.
Scott
---------------------------------------------------------------------------
---
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
