----- Original Message ----- From: "Stew Benedict" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, December 01, 2001 6:35 AM Subject: Re: Still have the same problem
> > On Fri, 30 Nov 2001, Aaron Stechesen wrote: > > > here is the yaboot.conf details: > > > > init-message="\nWelcome to Mandrake Linux!\n" > > boot=/dev/hda7 > > ofboot=hd:7 > > delay=30 > > timeout=50 > > install=/usr/local/lib/yaboot/yaboot > > magicboot=/usr/local/lib/yaboot/ofboot > > enablecdboot > > enableofboot > > defaultos=linux > > default=linux > > novram > > image=hd:8,/boot/vmlinuz > > label=failsafe > > root=/dev/hda8 > > initrd=hd:8./boot/initrd.img > > append=" failsafe" > > read-only > > macosx=hd:6 > > image=hd:8,/boot/vmlinuz > > label=linux > > root=/dev/hda8 > > initrd=hd:8,/boot/initrd.img > > read-write > > > > This looks mostly OK. This line is probably just a typo?: > > > initrd=hd:8./boot/initrd.img > > Note the "." instead of "," > No. I t is. in fact initrd=hd:8,/boot/initrd.img > Did you rerun ybin while you were in the chroot? Not yet. And id so did you get the > boot prompt?Also did you check the Open Firmware boot-device settings? The setting is setenv boot-device hd:7,\\:tbxi and the bootloader starts just fine. I boot into OS X, Firmware and CDROM without troubles. > > To edit in rescue you would use vi. For that I'd suggest checking google, > as I'd rather not get into a vi lesson here. Coming from MacOS, vi may > seem a bit strange, but it's something you can count on being present on > most any unix system you sit down at. > Just how would I launch it if I need to. Do I even need to? does the "," need to be "."? Thanks alot for your assistance by the way. There is a serious lack of help on the mandrake user site and not a heck of alot of info tothis problem elsewhere. > Stew Benedict > > -- > MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ > PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/ > > >
