attached is /proc/bus/usb/devices
/tmp/syslog.log showed pretty much what i have below.
----- Original Message -----
From: "Pixel" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, September 10, 2000 3:20 PM
Subject: Re: [Cooker] USB broken on current cooker.
> "David Foresman" <[EMAIL PROTECTED]> writes:
>
> > this is from dmesg after installing from ps/2 keyboard.
> >
> > usb.c: USB new device connect, assigned device number 5
> > usb.c: This device is not recognized by any installed USB driver.
> > usb.c: USB new device connect, assigned device number 6
> > usb.c: This device is not recognized by any installed USB driver.
> > usb.c: USB new device connect, assigned device number 7
> > usb.c: This device is not recognized by any installed USB driver.
> >
> >
> > this looks to be a kernel problem, not a installer problem.
>
> can you switch to console 2 and give :
>
> cat /proc/bus/usb/devices
>
> ?
>
>
> thanks, Pixel.
>
>
devices
