Ok, I finally got an Install to work using yesturdays cooker update and a
PS/2 keyboard for the keyboard parts.
This is definatly and installer problem. After Install, if I put
KEYBOARD=yes in /etc/sysconfig/usb, the usb keyboard works fine.
Like I've said before. this worked completely in cooker right before the
7.2b1 release but has been broken since.
----- Original Message -----
From: "David Foresman" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 12, 2000 8:30 PM
Subject: Re: [Cooker] USB broken on current cooker.
> Ok, after lots of testing. I have my USB mouse and USB keyboard plugged
> into a IOGEAR USB KVM which is also a 4 port USB hub. This is the same
hub
> I was testing with before the 7.2 beta release, and i think it might be a
> 2.2.17 kernel problem.
>
> When the mouse and keyboard are plugged directly into the computer they
work
> fine.
>
> The ports on the USB hub are aranged like this.
>
> A B
> C D
>
> If I have both the mouse and the keyboard pluged in, whichever device is
> plugged into port B works. If I unplug either the keyboard or the mouse,
> the other device works in any port.
>
> I am going to do some more testing, but as USB is a daisy chain
technology,
> all devices should work in any port. Something is messed up in the hub
> detection code.
>
> This is probably a kernel problem, if you think I should, I will forward
> this error on to lkml.
>
> Thanks.
> ----- Original Message -----
> From: "Chmouel Boudjnah" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, September 12, 2000 4:42 AM
> Subject: Re: [Cooker] USB broken on current cooker.
>
>
> > "David Foresman" <[EMAIL PROTECTED]> writes:
> >
> > > attached is /proc/bus/usb/devices
> > >
> > > /tmp/syslog.log showed pretty much what i have below.
> >
> > Could you try to connect the USB devices directly not on the HUB ? and
> > see if they are detected ? And what type of HUB you have ?
> >
> > --
> > MandrakeSoft Inc http://www.chmouel.org
> > Paris, France --Chmouel
> >
> >
>
>
>
