I'm sorry. I quoted from the wrong message.
My USB keyboard and mouse do not work during the installer. I can get one
or the other to work depending on where in the hub i plug the device in. I
chose to let the mouse work and get the installer working using a PS/2
keyboard. After install was over the USB keyboard still did not work until
i put keyboard=yes in /etc/sysconfig/usb. The keyboard and mouse both work
completely in redhat.
I will try the command below after taking keyboard=yes out of
/etc/sysconfig/usb.
----- Original Message -----
From: "Chmouel Boudjnah" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 22, 2000 10:13 AM
Subject: Re: [Cooker] USB broken on current cooker.
> "David Foresman" <[EMAIL PROTECTED]> writes:
>
> > Ok, I finally got an Install to work using yesturdays cooker update and
a
> > PS/2 keyboard for the keyboard parts.
> >
> > This is definatly and installer problem. After Install, if I put
> > KEYBOARD=yes in /etc/sysconfig/usb, the usb keyboard works fine.
> >
> > Like I've said before. this worked completely in cooker right before
the
> > 7.2b1 release but has been broken since.
>
> This should be autodetected by the script, does :
>
> grep -qE "^I.*Cls=03.*Prot=01" /proc/bus/usb/devices && echo bingo
>
> say you bingo ?
>
> --
> MandrakeSoft Inc http://www.chmouel.org
> Paris, France --Chmouel
>
>
>
