Attaching logs: cbmem -1 > https://del.dog/raw/cbmemlog lspci -vvxxx > https://del.dog/raw/sd-mmc-not-fw
On 08.04.2020 13:45, AreYouLoco? wrote: > I can confirm that my Firewire controller with coreboot is detected as > MMC/SD Controller. The same situation as yours so seems like a bug. > > I tried Debian and Ubuntu Studio both detect it as SD/MMC Controller. > It gets detected correctly on stock BIOS. Devs? > > On 08.04.2020 13:22, Alesandar Metodiev wrote: >> AreYouLoco, I am really glad to see there is someone else who is >> interested in this. If necessary, I will provide the coreboot config in >> a few hours, but it was nothing special. >> It was built from master and I have simply selected mainboard >> vendor/model, checked /Use CMOS for configuration values /and >> increased /Size of CBFS/ up to 0x300000. >> >> In the meanwhile, here's my only lspci entry related to >> Ricoh: https://del.dog/lspci_ricoh_coreboot.txt >> >> I believe that /src/mainboard/lenovo/t420/devicetree.cb/ (around line >> 85) has a statement related to that controller, but I will have to take >> a closer look at the coreboot source-code. >> >> device pci 1c.4 on >> chip drivers/ricoh/rce822 >> register "sdwppol" = "1" >> register "disable_mask" = "0x87" >> device pci 00.0 on end >> end >> end # PCIe Port #5 (Ricoh SD & FW) >> >> >> On Wed, Apr 8, 2020 at 1:05 PM AreYouLoco? <areyoul...@paranoici.org >> <mailto:areyoul...@paranoici.org>> wrote: >> >> On stock latest firmware and ubuntu studio I do see this: >> https://del.dog/raw/firewire_lspci >> >> I just builded coreboot. Backing up stock and trying to see if it's >> detected with coreboot. >> >> Fingers crossed! >> >> On April 8, 2020 9:15:22 AM UTC, Paul Menzel <pmen...@molgen.mpg.de >> <mailto:pmen...@molgen.mpg.de>> wrote: >> >Dear AreYouLoco, >> > >> > >> >Am 08.04.20 um 10:59 schrieb AreYouLoco?: >> > >> >> I am in the same situation. Same board and same controller. Still >> >> didn't flash coreboot but I also want to make FW work with coreboot. >> >> Could you please share your coreboot build config? Did you build >> >> master repo? >> >> >> >> Thanks. I am also willing to test images and configs to make that >> >> setup work. >> > >> >So, as you still running the vendor firmware, does this setup, >> >especially the FireWire/USB controller (40GAB5809-G200), work with the >> >vendor firmware? If so, please share the Linux messages and attach the >> >output of `sudo lspci -vvxxx`. >> > >> > >> >Kind regards, >> > >> >Paul >> >_______________________________________________ >> >coreboot mailing list -- coreboot@coreboot.org >> <mailto:coreboot@coreboot.org> >> >To unsubscribe send an email to coreboot-le...@coreboot.org >> <mailto:coreboot-le...@coreboot.org> >> > -- AreYouLoco? GPG 2717 7338 4742 E034 F65F 7C83 C757 3088 E8B7 DEDA _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
