>Back to the initial question, worded even shorter: "Is it possible to
>manually select a few pictures in the light table mode and batch enable
>lens correction ? How ?"
If you are using DT v1.5 (git master only) then you can:
if the values that are set in lens iop after you press reset (or just
switch it on without touching any controls) are fine for you - then just
create auto-appliable preset and everything will work exactly as you would
expect it to work
otherwise - [for now] you can not.
On Wed, May 21, 2014 at 10:38 AM, Stéphane Gourichon <
[email protected]> wrote:
> Le 21/05/2014 02:11, [email protected] a écrit :
> > -> horrible results; most photos where more deformed than without it.
> > But then I discovered why: the "paste" apply the correction with the
> > focal lenght of photo1... so it is wrong for most of the other photos!
>
> Hello,
>
> I've been considering writing a similar thing, thank you Romano for
> doing it.
>
> There's an even simpler and more common case : even when everything is
> detected correctly, one may want to batch enable lens correction on a
> set of pictures.
>
> A similar thing was discussed regarding "auto" setting in exposure
> module: copy-paste applies the specific values that were computed by
> auto-exposure on the source photo, while in some (not all) cases the
> user means "I want to apply auto-exposure to all destination photos, not
> apply the particular EV adjust amount that was computed for the source
> picture".
>
> Back to the initial question, worded even shorter: "Is it possible to
> manually select a few pictures in the light table mode and batch enable
> lens correction ? How ?"
>
> --
> Stéphane Gourichon
>
>
>
> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.
> Get unparalleled scalability from the best Selenium testing platform
> available
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Darktable-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/darktable-users
>
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Darktable-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/darktable-users
