>But then I discovered why: the "paste" apply the correction with the
>focal lenght of photo1... so it is wrong for most of the other photos!
>Is this normal?
Yes, that is not a bug.
The bug is that your lens wasn't properly detected by exiv2.
>But in my case I have to manually choose the lens --- so this will not
apply, correct?
ATM it is correct.
But that is still not a bug, merely unimplemented functionality.
On Wed, May 21, 2014 at 6:03 PM, <[email protected]> wrote:
> On 2014-05-21 06:30, Roman Lebedev wrote:
> >> Back to the initial question, worded even shorter: "Is it possible to
> >> manually select a few pictures in the light table mode and batch
> > enable
> > >lens correction ? How ?"
> >
> > If you are using DT v1.5 (git master only) then you can:
> > if the values that are set in lens iop after you press reset (or just
> > switch it on without touching any controls) are fine for you - then
> > just create auto-appliable preset and everything will work exactly as
> > you would expect it to work
> >
>
> But in my case I have to manually choose the lens --- so this will not
> apply, correct?
>
> I have not seen the 1.5 implementation, but my suggestion is that the
> (subset) of parameters in a module that could be auto-applied (in the
> case of the exposure, is just one; in the case of the lens correction,
> there are two or even three sets - lens type, geometry, TCA) should have
> an "auto" tick; when ticked, the parameters are grayed out and
> automatically recalculated on paste. It's IMHO clean and intuitive.
>
> Thanks!
>
>
>
> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.
> Get unparalleled scalability from the best Selenium testing platform
> available
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Darktable-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/darktable-users
>
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Darktable-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/darktable-users
