Hi,
I posted in this in u-boot list. Since this is more specific to Davinci I am
posting here. If anyone has used recent version of u-boot for DM6467 and
managed to boot from NAND flash then let me know. Following is the issue I am
facing with U-boot.
I am using u-boot version 2009.3 for TI Davinci DM6467 EVM. The reason to use
this was support of usb related commands for DM6467 in this tree.
I built the u-boot.bin for NAND flash. My only modification was in file
include/configs/davinci_devevm.h where I #define CONFIG_SYS_USE_NAND
I built this and flashed this using TI provide sfh_DM6467.exe. The flashng goes
well and I see blocks 6 and 7 being written. However on power on of EVM I see
following:
Chip initialization passed!
TI UBL Version: 1.30
Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid MagicNum found.
DONE
Jumping to entry point at 0x81080000
This keeps repeating and EVM it is unable to boot.
Any one used this version of u-boot with a NAND flash and TI DVEVM. Any
suggestion on changes I should make to isolate this error ?
Regards,
Neeraj
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
