Thanks Sandeep,
I need USB read support in u-boot so uImage and filesystem can be read off a USB memory stick. This is the reason I wanted to move to a version other than TI released u-boot 1.2 for 6467. Would you be knowing if any u-boot version supports USB read from U-boot for DM6467 ? Regards, Neeraj --- On Sat, 4/4/09, Paulraj, Sandeep <s-paul...@ti.com> wrote: > From: Paulraj, Sandeep <s-paul...@ti.com> > Subject: RE: DM6467 EVM u-boot Nand flash issue > To: "Neeraj Tandon" <tandonneera...@yahoo.com>, > "davinci-linux-open-source@linux.davincidsp.com" > <davinci-linux-open-source@linux.davincidsp.com> > Date: Saturday, April 4, 2009, 5:20 PM > Neeraj, > The latest U_boot > does not have support for DM6467. > You are compiling for the DVEVM. This is meant for DM6446. > Compiling for DM6446 and using it for DM6467 EVM will not > work. > > Withing TI we have got U-Boot working on 1.3.4. Maybe you > can use that. > > I will add support for DM6467 in U-Boot GIT later > this month > > Thanks, > Sandeep > ________________________________________ > From: davinci-linux-open-source-boun...@linux.davincidsp.com > [davinci-linux-open-source-boun...@linux.davincidsp.com] > On Behalf Of Neeraj Tandon [tandonneera...@yahoo.com] > Sent: Saturday, April 04, 2009 1:38 PM > To: davinci-linux-open-source@linux.davincidsp.com > Subject: DM6467 EVM u-boot Nand flash issue > > Hi, > > I posted in this in u-boot list. Since this is more > specific to Davinci I am posting here. If anyone has used > recent version of u-boot for DM6467 and managed to boot from > NAND flash then let me know. Following is the issue I am > facing with U-boot. > > I am using u-boot version 2009.3 for TI Davinci DM6467 EVM. > The reason to use this was support of usb related commands > for DM6467 in this tree. > > I built the u-boot.bin for NAND flash. My only modification > was in file > include/configs/davinci_devevm.h where I #define > CONFIG_SYS_USE_NAND > > I built this and flashed this using TI provide > sfh_DM6467.exe. The flashng goes well and I see blocks 6 and > 7 being written. However on power on of EVM I see > following: > > Chip initialization passed! > TI UBL Version: 1.30 > Booting Catalog Boot Loader > BootMode = NAND > Starting NAND Copy... > Valid MagicNum found. > DONE > Jumping to entry point at 0x81080000 > > This keeps repeating and EVM it is unable to boot. > > Any one used this version of u-boot with a NAND flash and > TI DVEVM. Any suggestion on changes I should make to isolate > this error ? > > Regards, > Neeraj > > > > > > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source