Hi, You should go to denx site which hosts u-boot. It has links for all previously released u-boot version.
My understanding is TI supported u-boot version is only 1.2 Regards, Neeraj - --- On Mon, 4/6/09, Sidharth Garde <sidharth.ga...@mte-india.com> wrote: > From: Sidharth Garde <sidharth.ga...@mte-india.com> > Subject: Re: DM6467 EVM u-boot Nand flash issue > To: "Paulraj, Sandeep" <s-paul...@ti.com>, "Neeraj Tandon" > <tandonneera...@yahoo.com>, davinci-linux-open-source@linux.davincidsp.com > Date: Monday, April 6, 2009, 12:02 AM > Dear All, > > I am also working on a DM6467 proceesor. Can you please > tell me where I can find U-Boot 1.3.4 and u-boot version > 2009.3 for downloading? > > Thanks, > > Sidharth > > ----- Original Message ----- From: "Paulraj, Sandeep" > <s-paul...@ti.com> > To: "Neeraj Tandon" <tandonneera...@yahoo.com>; > <davinci-linux-open-source@linux.davincidsp.com> > Sent: Sunday, April 05, 2009 5:50 AM > Subject: RE: DM6467 EVM u-boot Nand flash issue > > > Neeraj, > The latest > U_boot does not have support for DM6467. > You are compiling for the DVEVM. This is meant for DM6446. > Compiling for DM6446 and using it for DM6467 EVM will not > work. > > Withing TI we have got U-Boot working on 1.3.4. Maybe you > can use that. > > I will add support for DM6467 in U-Boot GIT later > this month > > Thanks, > Sandeep > ________________________________________ > From: davinci-linux-open-source-boun...@linux.davincidsp.com > [davinci-linux-open-source-boun...@linux.davincidsp.com] > On Behalf Of Neeraj Tandon [tandonneera...@yahoo.com] > Sent: Saturday, April 04, 2009 1:38 PM > To: davinci-linux-open-source@linux.davincidsp.com > Subject: DM6467 EVM u-boot Nand flash issue > > Hi, > > I posted in this in u-boot list. Since this is more > specific to Davinci I am posting here. If anyone has used > recent version of u-boot for DM6467 and managed to boot from > NAND flash then let me know. Following is the issue I am > facing with U-boot. > > I am using u-boot version 2009.3 for TI Davinci DM6467 EVM. > The reason to use this was support of usb related commands > for DM6467 in this tree. > > I built the u-boot.bin for NAND flash. My only modification > was in file > include/configs/davinci_devevm.h where I #define > CONFIG_SYS_USE_NAND > > I built this and flashed this using TI provide > sfh_DM6467.exe. The flashng goes well and I see blocks 6 and > 7 being written. However on power on of EVM I see > following: > > Chip initialization passed! > TI UBL Version: 1.30 > Booting Catalog Boot Loader > BootMode = NAND > Starting NAND Copy... > Valid MagicNum found. > DONE > Jumping to entry point at 0x81080000 > > This keeps repeating and EVM it is unable to boot. > > Any one used this version of u-boot with a NAND flash and > TI DVEVM. Any suggestion on changes I should make to isolate > this error ? > > Regards, > Neeraj > > > > > > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source