Hallo an alle In meinem Computer sitzt eine Radeon 9550 Karte mit zwei Videoausgängen (1x digital, 1x analog). Daran hängen ein CRT und ein TFT. An sich funktioniert das Ganze wunderbar, nur wenn ich fern sehen will auf dem TFT, streikt tvtime mit folgenden Meldungen: (keine Probleme auf dem CRT)
Running tvtime 0.9.15. rtctimer: Cannot set periodic interval: Permission denied Failed to get 1024 Hz resolution from your RTC device. High resolution access is necessary for video to be smooth. Please run tvtime as root, set tvtime as SUID root, or change the maximum RTC resolution allowed for user processes by running this command as root: sysctl -w dev.rtc.max-user-freq=1024 See our support page at http://tvtime.net/ for more information. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/ec/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. Wenn ich tvtime dann als root ausführe, zaubert es eine verkürzte Version der oberen Meldung auf den Bildschirm: Running tvtime 0.9.15. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /root/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. Das system läuft mit den Treibern von ATI. Ich weiss nicht ob es sich wirklich lohnt, die gatos Treiber auszuprobieren, denn auf dem andern Monitor funktioniert alles wie es soll. Woran könnte es denn liegen dass der TFT hierbei nicht mitmacht? Wenn er als einziger (und damit primärer) Monitor angeschlossen ist, klappts auch darauf mit dem Fernsehn. Vielen Dank schon mal für die Bemühungen Gruss Elvis