OK, using

         startx >& X.log

I get the following:



XFree86 Version 3.3.5 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 23 1999
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.10 i686 [ELF]
Configured drivers:
  GLINT: accelerated server for 3DLabs GLINT graphics adapters
(Patchlevel 0)
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us_microsoft)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) GLINT: Graphics device ID: "3DLabs Card"
(**) GLINT: Monitor ID: "ViewSonic PT813"
(--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(**) FontPath set to  
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base  
0xe3000000
(--) GLINT: Framebuffer address at 0xe2000000
(**) GLINT: videoram : 8192k
(--) GLINT: Using builtin RAMDAC of Permedia 2 chip
(--) GLINT: Fitted Memory type is : SGRAM
(--) GLINT: VGA core is : Enabled
(--) GLINT: Maximum allowed dot-clock: 230.000 MHz
(**) GLINT: Cannot support interlaced modes, deleting.
(**) GLINT: Cannot support interlaced modes, deleting.
(**) GLINT: Cannot support interlaced modes, deleting.
(**) GLINT: Mode "640x480": mode clock =  45.800
(**) GLINT: Mode "800x600": mode clock =  69.650
(**) GLINT: Mode "1024x768": mode clock = 115.500
(**) GLINT: Mode "1280x1024": mode clock = 157.500
(--) GLINT: Using XAA (XFree86 Acceleration Architecture)
(--) GLINT: XAA: Solid filled rectangles
(--) GLINT: XAA: Screen-to-screen copy
(--) GLINT: XAA: Using 10 128x128 areas for pixmap caching
(--) GLINT: XAA: Caching tiles and non-transparent stipples
(--) GLINT: XAA: Horizontal and vertical lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm  
-m us_microsoft -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp  
"> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86  
compiled/xfree86.xkm'

waiting for X server to shut down

Reply via email to