keys are here (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting.
so, 3 modeliens that you have defined are invalid. which 3 is another thing. im not sure if the modelines listed are all the valid ones or the valid ones and the invalid ones. what are all your defined modelines in XF86Config ? i see that xf86config creates a whole lotta extra crap, try usin XF86Setup if possible to setup X. it makes a much cleaner XF86Config in my opinion. nate On Tue, 16 Nov 1999, Brian Boonstra wrote: boonst >OK, using boonst > boonst > startx >& X.log boonst > boonst >I get the following: boonst > boonst > boonst > boonst >XFree86 Version 3.3.5 / X Window System boonst >(protocol Version 11, revision 0, vendor release 6300) boonst >Release Date: August 23 1999 boonst > If the server is older than 6-12 months, or if your card is newer boonst > than the above date, look for a newer version before reporting boonst > problems. (see http://www.XFree86.Org/FAQ) boonst >Operating System: Linux 2.2.10 i686 [ELF] boonst >Configured drivers: boonst > GLINT: accelerated server for 3DLabs GLINT graphics adapters boonst >(Patchlevel 0) boonst >(using VT number 7) boonst > boonst >XF86Config: /usr/X11R6/lib/X11/XF86Config boonst >(**) stands for supplied, (--) stands for probed/default values boonst >(**) XKB: keymap: "xfree86(us_microsoft)" (overrides other XKB settings) boonst >(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 boonst >(**) GLINT: Graphics device ID: "3DLabs Card" boonst >(**) GLINT: Monitor ID: "ViewSonic PT813" boonst >(--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. boonst >(**) FontPath set to boonst >"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" boonst >(--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base boonst >0xe3000000 boonst >(--) GLINT: Framebuffer address at 0xe2000000 boonst >(**) GLINT: videoram : 8192k boonst >(--) GLINT: Using builtin RAMDAC of Permedia 2 chip boonst >(--) GLINT: Fitted Memory type is : SGRAM boonst >(--) GLINT: VGA core is : Enabled boonst >(--) GLINT: Maximum allowed dot-clock: 230.000 MHz boonst >(**) GLINT: Cannot support interlaced modes, deleting. boonst >(**) GLINT: Cannot support interlaced modes, deleting. boonst >(**) GLINT: Cannot support interlaced modes, deleting. boonst >(**) GLINT: Mode "640x480": mode clock = 45.800 boonst >(**) GLINT: Mode "800x600": mode clock = 69.650 boonst >(**) GLINT: Mode "1024x768": mode clock = 115.500 boonst >(**) GLINT: Mode "1280x1024": mode clock = 157.500 boonst >(--) GLINT: Using XAA (XFree86 Acceleration Architecture) boonst >(--) GLINT: XAA: Solid filled rectangles boonst >(--) GLINT: XAA: Screen-to-screen copy boonst >(--) GLINT: XAA: Using 10 128x128 areas for pixmap caching boonst >(--) GLINT: XAA: Caching tiles and non-transparent stipples boonst >(--) GLINT: XAA: Horizontal and vertical lines and segments boonst >System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm boonst >-m us_microsoft -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp boonst >"> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 boonst >compiled/xfree86.xkm' boonst > boonst >waiting for X server to shut down boonst > ----------------------------------------[mailto:[EMAIL PROTECTED] ]-- Vice President Network Operations http://www.firetrail.com/ Firetrail Internet Services Limited http://www.aphroland.org/ Everett, WA 425-348-7336 http://www.linuxpowered.net/ Powered By: http://comedy.aphroland.org/ Debian 2.1 Linux 2.0.36 SMP http://yahoo.aphroland.org/ -----------------------------------------[mailto:[EMAIL PROTECTED] ]-- 10:03am up 88 days, 21:36, 2 users, load average: 2.08, 1.88, 1.71