Hi,
sorry, I am a bit late with my vote.. but then I'll wait for RC2 to vote there.
Once again, thank you Xiandong for being RM and you are already doing an
excellent Job!
Julian
Am 02.10.19, 17:17 schrieb "Xiangdong Huang" <saint...@gmail.com>:
Hi all,
The vote of RC1 has lasted more than 72 hours.
There are 2 +1 votes and 1 -1 veto.
Chris, Justin, Lei Rui and Jialin pointed some issues and I will fix them
to release RC2.
As now we are on National Day Holiday and my Mac Mini which has the GPG
private key is in the laboratory...
I will release RC2 in the evening of Oct 4, or the morning of Oct 5.
By the way, we encourage more PPMCs join the next votes. Thanks!
Best,
-----------------------------------
Xiangdong Huang
School of Software, Tsinghua University
黄向东
清华大学 软件学院
Lei Rui <nezhaleg...@163.com> 于2019年9月30日周一 下午3:14写道：
> Hi all, my vote is +1 (binding) PPMC Vote.
>
>
>
>
> Thanks to Feinauer, I followed [1] and checked:
>
> 1. download staged artifacts. Check their signature and hashes.
>
> ✔ [RM] verify the reported signature is for an "apache.org" address
> ("gpg: Good signature from ...")
>
> ✔ [RM] verify the reported hashes
>
> I use the tool [2] to automatically finish this step.
>
> 2. extract src bundle
>
> ✔ cd downloaded-iotdb-0.8.1rc1
>
> ✔ unzip 0.8.1/rc1/apache-iotdb-0.8.1-incubating-source-release.zip
>
> ✔ verify the existence of LICENSE, NOTICE, README, RELEASE_NOTES files in
> the extracted source bundle
>
> ✔ [RM] verify the staged source README, RELEASE_NOTE files correspond to
> those in the extracted source bundle
>
> 3. staged src bundle items: content, can compile & test
>
> ✔ a. cd apache-iotdb-0.8.1-incubating
>
> ✔ b. check the contents of LICENSE, NOTICE, README, RELEASE_NOTES
>
> ❗ c. UNPACK the binary artefact and check the contents of LICENSE-binary
> and NOTICE-binary
>
> ✔ d. build from directions in README with an empty maven local repo
>
> ❗ e. [RM] review target/rat.txt (though the build should fail if RAT
> constraints aren't met)
>
> ❗ f. Search for SNAPSHOT references
>
> ✔ g. ./mvnw install
>
> ✔ h. ./mvnw site:site
>
> Btw, I don't understand the sentence "NOTE: can't do this in a
> source-bundle (only in a repo) " as noted in the step h [1].
>
> Therefore, in my practice, I run ./mvnw install and ./mvnw
> site:site under the extracted src bundle got from the previous step "unzip
> 0.8.1/rc1/apache-iotdb-0.8.1-incubating-source-release.zip".
>
> Details of three ❗ items:
>
> ❗ c. UNPACK the binary artefact and check the contents of LICENSE-binary
> and NOTICE-binary
>
> NOTICE-binary HIVE shows 2008-2018 while NOTICE HIVE shows 2008-2019.
>
> ❗ e. [RM] review target/rat.txt (though the build should fail if RAT
> constraints aren't met)
>
> I didn't find the 'rat.txt' in the download staged artifacts. I don't know
> if it is right.
>
> ❗ f. Search for SNAPSHOT references
>
> I found ./hadoop/pom.xml reference 0.8.0-SNAPSHOT. The hadoop module is
> excluded from the build.
>
>
>
>
> By the way, there are some issues in the README.md:
>
> The referenced wbesite https://iotdb.apache.org/#/Download does not have
> 0.8.1 version yet. Maybe we can update the website quickly after this
> release.
>
> Out-of-date information in the Configure chapter: Now we have two more
> configuration files: logback-tool.xml and iotdb-sync-client.properties.
>
>
>
>
> Sincerely,
>
> Lei Rui
>
> ---
>
> [1]
>
https://cwiki.apache.org/confluence/display/IOTDB/Validating+a+staged+Release
>
> [2] https://github.com/apache/incubator-iotdb/pull/441
>
>
>
> On 9/30/2019 09:18，Willem Jiang<willem.ji...@gmail.com> wrote：
> Hi Xiangdong,
>
> You may close this vote before starting a new vote.
>
> Willem Jiang
>
> Twitter: willemjiang
> Weibo: 姜宁willem
>
> On Sun, Sep 29, 2019 at 7:17 PM Xiangdong Huang <saint...@gmail.com>
> wrote:
>
> Hi,
>
> As Chris and Jialin pointed out some issues, I will release RC2 to fix
them
> later.
>
> Best,
> -----------------------------------
> Xiangdong Huang
> School of Software, Tsinghua University
>
> 黄向东
> 清华大学 软件学院
>
>
> Jialin Qiao <qj...@mails.tsinghua.edu.cn> 于2019年9月29日周日 上午11:00写道：
>
> Hi,
>
> -1 (binding)
>
> Major bug: The version printed in client is still 0.8.0
>
> Others are all ok, I checked:
>
> Binary release:
> has NOTICE, LICENSE and DISCLAIMER
> Start server ok
> Start client ok
> compatible with 0.8.0, both client-0.8.1 with server-0.8.0 and
> client-0.8.0 with server-0.8.1
> Example statement see below:
>
> ```
> SET STORAGE GROUP TO root.turbine;
> CREATE TIMESERIES root.turbine.d1.s0 WITH DATATYPE=FLOAT, ENCODING=RLE;
> insert into root.turbine.d1(timestamp,s0) values(1,24.5);
> ```
>
> Source release:
> has NOTICE, LICENSE and DISCLAIMER
> mvn clean package
>
> Thanks,
> --
> Jialin Qiao
> School of Software, Tsinghua University
>
> 乔嘉林
> 清华大学 软件学院
>
> -----原始邮件-----
> 发件人: "Christofer Dutz" <christofer.d...@c-ware.de>
> 发送时间: 2019-09-28 21:47:51 (星期六)
> 收件人: "dev@iotdb.apache.org" <dev@iotdb.apache.org>
> 抄送:
> 主题: Re: [VOTE] Apache IoTDB 0.8.1 (incubating) RC1
>
> +1 (binding)
> However with some minor findings see below.
>
> Please also automatically carry forward this +1 to the incubator voting
>
> In preparation I went to the KEYS file and searched for the latest
> entry, copied the fingerprint of that key and searched for it with my PGP
> tool. I found the key and imported it. The email address reported matched
> the one I expected.
>
> - Validated the SHA512 checksums: OK
> - Validated the PGP signature: OK (However there is no established trust
> chain to any other Apache ... actually to no-one ... @Xiangdong you really
> should go to one of the Key-Signing-Events and have your key signed by
> other Apaches)
> - LICENSE, NOTICE, README, RELEASE_NOTES exist: OK
> - Checked contents of LICENSE, NOTICE, README, RELEASE_NOTES: OK
> - Build IoTDB Server according to information in README.md: OK
> - Running IoTDB Server according to information in README.md: MINOR (I
> am using OpenJDK 13 and I get an error message that IoTDB only runs on
Java
> 8 and 11 ... this sort of contradicts the README which states X >= 1.8)
> - Running IoTDB Server with OpenJDK 11.0.2: OK
> - Build IoTDB Client according to information in README.md: OK
> - Running IoTDB Client according to information in README.md: OK
> - Running a full maven build with all tests (mvn clean install): OK
> - RAT didn’t report anything concerning (All binary files are image
> files): OK (I would suggest to add an Apache Header to the ".checkstyle"
> XML file)
> - It seems the Hadoop module still contains SNAPSHOT versions: MINOR
> - Binary distribution unpacks: OK
> - Able to run the server and client: MINOR (Same finding as with the
> source distribution ... not able to run with OpenJDK 13)
> - Binary distribution contains: NOTICE and LICENSE that mention
> additional elements of the binary distribution: OK
>
>
>
>
>
> Am 28.09.19, 07:43 schrieb "Xiangdong Huang" <saint...@gmail.com>:
>
> Hi all,
>
> First, thanks to all of you for the support. This is my first time
> to be as
> a RM of Apache project and I want to thank all guys. It's because
> all of
> you are so patient to answer my question that I can do this release.
> Special thanks go to our Mentors, our committers, and a lot of
> documents
> from PLC4X, Apache, Spark, etc..
>
> Apache IoTDB (incubating) 0.8.1 is a bug-fix version from 0.8.0. You
> can
> get its mainly changes from [5].
>
> Apache IoTDB (Incubating) 0.8.1 has been staged under [2] and it’s
> time to
> vote
> on accepting it for release. All Maven artifacts are available
> under [1].
> If approved we will seek final release approval from the IPMC.
> Voting will be open for 72hr.
>
> A minimum of 3 binding +1 votes and more binding +1 than binding -1
> are required to pass.
>
> Release tag: release/0.8.1
> Hash for the release tag: b664e8778d1221c4eb92205411e58c392214b3ab
>
> Per [3] "Before voting +1 PMC/PPMC members are required to download
> the signed source code package, compile it as provided, and test
> the resulting executable on their own platform, along with also
> verifying that the package meets the requirements of the ASF policy
> on releases."
>
> You can achieve the above by following [4].
>
> [ ] +1 accept (indicate what you validated - e.g. performed the
> non-RM
> items in [4])
> [ ] -1 reject (explanation required)
>
> [1]
> https://repository.apache.org/content/repositories/orgapacheiotdb-1004
> [2] https://dist.apache.org/repos/dist/dev/incubator/iotdb/0.8.1/rc1
> [3] https://www.apache.org/dev/release.html#approving-a-release
> [4]
>
>
>
https://cwiki.apache.org/confluence/display/IOTDB/Validating+a+staged+Release
> [5]
>
> https://dist.apache.org/repos/dist/dev/incubator/iotdb/0.8.1/rc1/README.md
>
> Best,
> ----------------------------------
> Xiangdong Huang
> School of Software, Tsinghua University
>
> 黄向东
> 清华大学 软件学院
>
>
>
>
