Hi, Happy new year!
A few days ago, I updated my patch of the pac4j gateway provider according to all comments on https://issues.apache.org/jira/browse/KNOX-641 as well as the documentation on KNOX-642. Is everything ok for the merge? Thanks. Best regards, Jérôme 2015-12-14 15:28 GMT+01:00 larry mccay <larry.mc...@gmail.com>: > Hi Jérôme - > > Not sure if you saw but I added review comments to KNOX-641. > > I think that we need to determine whether we want the testBasicAuth in the > provider itself. > > Let's follow up on the JIRA. > > thanks, > > --larry > > On Fri, Dec 11, 2015 at 8:44 AM, Jérôme LELEU <lel...@gmail.com> wrote: > > > Hi, > > > > No problem. It can go into a version 0.8.0 if needed. The truth is that > > there is only one change outside the new pac4j module, so I think risks > are > > extremly limited. > > > > Just let met know. > > > > Thanks. > > Best regards, > > Jérôme > > > > > > 2015-12-11 14:23 GMT+01:00 larry mccay <larry.mc...@gmail.com>: > > > > > Hi Jérôme - > > > > > > I have unfortunately not had a chance to pull, review and test it yet > and > > > have intended to do that today. > > > I apologize for the delay. > > > > > > I was actually thinking that this would go into a follow up release > that > > we > > > would try and get done rapidly after the 0.7.0 release but we can > discuss > > > the target and its chances of destabilizing 0.7.0. > > > > > > I believe that it is rather self-contained with only a few changes to > > > external modules. > > > > > > Opening the JIRAs is perfect and I was going to do that once I started > > the > > > review. > > > > > > Let's continue review comments and collaboration on those JIRAs. > > > I will add you to the contributors list so that we can assign them to > > you. > > > > > > Thank you for your contributions and your patience, Jérôme! > > > > > > --larry > > > > > > On Fri, Dec 11, 2015 at 3:00 AM, Jérôme LELEU <lel...@gmail.com> > wrote: > > > > > > > Hi, > > > > > > > > I didn't get any new feedback on the pull request so I assume > > everything > > > is > > > > ok from your point of view. > > > > > > > > I released pac4j v1.8.1 and j2e-pac4j v1.2.1 so I updated the pull > > > request > > > > to use them and successfully re-tested everything. > > > > > > > > I opened KNOX-641 and submitted the corresponding patch. > > > > > > > > I also wrote the documentation, opened KNOX-642 and submitted the > > > > corresponding patch (just to let you know that it doesn't work out of > > the > > > > box in Windows, I had to replace mvn.bat by mvn.cmd to make ant > work). > > > > > > > > Even if the branch 0.7.0 has already been created, I assumed this new > > > pac4j > > > > provider will go into this version 0.7.0 (dependency on the > > > 0.7.0-SNAPSHOT > > > > parent version). > > > > > > > > Just let me know if everything is ok and when it's goind to be > merged. > > > > > > > > Thanks. > > > > Best regards, > > > > Jérôme > > > > > > > > > > > > > > > > > > > > 2015-12-04 14:20 GMT+01:00 larry mccay <larry.mc...@gmail.com>: > > > > > > > > > That ability to configure multiple mechanisms based on clientName > is > > > > really > > > > > interesting for Knox. > > > > > Currently, we require separate topologies per authentication > > mechanism. > > > > > The ability to configure them all in one is really great. > > > > > > > > > > We would need to think through the best way to provide the > clientName > > > > > parameter. > > > > > Since this is targeting KnoxSSO it can actually be added to the > > > > providerURL > > > > > used to redirect from the participating application. > > > > > Regardless of the authentication mechanism used each application > will > > > > still > > > > > get the same JWT based cookie. > > > > > > > > > > I think that should work really nicely. > > > > > > > > > > > > > > > On Fri, Dec 4, 2015 at 7:17 AM, larry mccay <larry.mc...@gmail.com > > > > > > wrote: > > > > > > > > > > > Excellent, Jérôme. > > > > > > Thanks! > > > > > > > > > > > > On Fri, Dec 4, 2015 at 2:40 AM, Jérôme LELEU <lel...@gmail.com> > > > wrote: > > > > > > > > > > > >> Hi, > > > > > >> > > > > > >> I will write how to configure the pac4j provider in the > > > documentation, > > > > > but > > > > > >> I can already give you some insights. > > > > > >> > > > > > >> My main goal is always to respect the key design principles of > > pac4j > > > > > >> whatever the environment / framework in which it is implemented. > > For > > > > > Knox, > > > > > >> I'm pretty happy with the use of the j2e-pac4j library, which > > means > > > > that > > > > > >> almost all the pac4j features are available, especially both > > direct > > > > and > > > > > >> indirect clients. So it can do what Shiro already does but also, > > as > > > we > > > > > >> agreed together, supports remote authentications. > > > > > >> > > > > > >> It is only limited by what you can currently configure. And even > > > > > >> configuration is a pac4j feature as the CAS server has the same > > > need. > > > > > >> Everything happens in this class: > > > > > >> > > > > > >> > > > > > > > > > > > > > > > https://github.com/pac4j/pac4j/blob/master/pac4j-config/src/main/java/org/pac4j/config/client/ConfigPropertiesFactory.java > > > > > >> , > > > > > >> which allows you to configure Facebook, Twitter, a CAS server, a > > > SAML > > > > > IdP > > > > > >> or an OpenID Connect provider. All the provided parameters to > the > > > > pac4j > > > > > >> provider are put into a Map and the ConfigPropertiesFactory is > > built > > > > > with > > > > > >> this Map to return the built client (= authentication > mechanism). > > > > > >> > > > > > >> You have one more specific option for Knox as a basic > > authentication > > > > > popup > > > > > >> where the username must match the password, you can define that > > by: > > > > > >> > > > > > >> <param> > > > > > >> <name>clientName</name> > > > > > >> <value>testBasicAuth</value> > > > > > >> </param> > > > > > >> > > > > > >> > > > > > >> It's for testing only. > > > > > >> > > > > > >> For a CAS server: > > > > > >> > > > > > >> <param> > > > > > >> <name>cas.loginUrl</name> > > > > > >> <value>https://casserverpac4j.herokuapp.com/login</value> > > > > > >> </param> > > > > > >> > > > > > >> > > > > > >> Here are all the properties available for building clients > (their > > > > > meaning > > > > > >> is obvious): > > > > > >> > > > > > >> facebook.id > > > > > >> facebook.secret > > > > > >> facebook.scope > > > > > >> facebook.fields > > > > > >> twitter.id > > > > > >> twitter.secret > > > > > >> saml.keystorePassword > > > > > >> saml.privateKeyPassword > > > > > >> saml.keystorePath > > > > > >> saml.identityProviderMetadataPath > > > > > >> saml.maximumAuthenticationLifetime > > > > > >> saml.serviceProviderEntityId > > > > > >> saml.serviceProviderMetadataPath > > > > > >> cas.loginUrl > > > > > >> cas.protocol > > > > > >> oidc.id > > > > > >> oidc.secret > > > > > >> oidc.discoveryUri > > > > > >> oidc.customParamKey1 > > > > > >> oidc.customParamValue1 > > > > > >> > > > > > >> > > > > > >> If you define multiple clients, the first one will be used for > > > > > >> authentication, but you can explicitly choose the client you > want > > to > > > > use > > > > > >> via the clientName parameter, assuming you want to switch from > > > client > > > > > >> depending on environment for example. > > > > > >> > > > > > >> So if you want to add some new authentication mechanism, you > must > > > > first > > > > > >> check that it is available in pac4j (if it's not, it's another > > > > > discussion, > > > > > >> but generally, it is). Then, you'll need to upgrade the > > > > > >> ConfigPropertiesFactory by submitting a new pull request to the > > > pac4j > > > > > >> project (I can do it myself, but I'm sure you could do that > > easily), > > > > > >> finally wait for the new pac4j release and switch pac4j versions > > in > > > > Knox > > > > > >> to > > > > > >> benefit from the new feature. > > > > > >> The good thing is that if someone related to the CAS server does > > the > > > > > same > > > > > >> thing for CAS (in pac4j), you will automatically get it when > > you'll > > > > > >> upgrade > > > > > >> pac4j. > > > > > >> > > > > > >> To go even further, replacing LDAP Shiro authentication is just > a > > > > matter > > > > > >> of > > > > > >> making pac4j LDAP authentication available via configuration > > > > parameters. > > > > > >> > > > > > >> I hope it was clear enough. > > > > > >> > > > > > >> Thanks. > > > > > >> Best regards, > > > > > >> Jérôme > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> 2015-12-03 20:45 GMT+01:00 larry mccay <larry.mc...@gmail.com>: > > > > > >> > > > > > >> > Excellent! > > > > > >> > > > > > > >> > I will carve out some time to do code review. > > > > > >> > We will need to get some insights into how to go about > testing: > > > > > >> > > > > > > >> > * is the CAS server going to be available for testing? > > > > > >> > * what are the specific and generic/standard (if any) > > > authentication > > > > > >> > mechanisms available - for instance: > > > > > >> > - Facebook, Google, LinkedIn and CAS are specifics > > > > > >> > - OAuth 2, OpenID Connect, SAML are generic/standards - > that > > > may > > > > > be > > > > > >> > used for the above specifics... > > > > > >> > * how do we test things other than CAS - in terms of getting > > > > > >> credentials, > > > > > >> > configuration, etc > > > > > >> > > > > > > >> > We could certainly do this is phases as well. > > > > > >> > > > > > > >> > If you can enumerate the things that should work and provide > > some > > > > > >> testing > > > > > >> > details for CAS or as many as possible and OpenID Connect then > > we > > > > can > > > > > >> test > > > > > >> > the specific implementations that you provide and enable the > > > testing > > > > > of > > > > > >> > another OpenID Connect effort that is in the works in the > > > community. > > > > > >> > > > > > > >> > I'm not sure whether we want to commit contributions that are > > > > > dependent > > > > > >> on > > > > > >> > snapshots - we certainly can't release with any such > > dependencies. > > > > > >> > I would hate to add a cleanup task to a release to make sure > > there > > > > are > > > > > >> no > > > > > >> > snapshots in there. > > > > > >> > We will probably wait until after the pac4j releases to > commit. > > > > > >> > > > > > > >> > I am really happy that this integration is happening and that > it > > > > went > > > > > >> > rather smoothly. > > > > > >> > These sorts of authentication protocols are complex and I > think > > we > > > > > >> lined up > > > > > >> > pretty well overall. > > > > > >> > > > > > > >> > Thanks for your work! > > > > > >> > > > > > > >> > On Thu, Dec 3, 2015 at 2:28 PM, Jérôme LELEU < > lel...@gmail.com> > > > > > wrote: > > > > > >> > > > > > > >> > > Hi, > > > > > >> > > > > > > > >> > > I just sync'ed with master, cleaned dependencies and added > > > missing > > > > > >> > > Javadocs. Everything works correctly now. Many thanks. > > > > > >> > > > > > > > >> > > The pull request is ready for a full code review: > > > > > >> > > https://github.com/apache/knox/pull/2 > > > > > >> > > > > > > > >> > > I'll write the documentation after the pac4j releases (I > hope > > > next > > > > > >> week). > > > > > >> > > > > > > > >> > > Thanks. > > > > > >> > > Best regards, > > > > > >> > > Jérôme > > > > > >> > > > > > > > >> > > > > > > > >> > > 2015-12-02 19:18 GMT+01:00 larry mccay < > larry.mc...@gmail.com > > >: > > > > > >> > > > > > > > >> > > > Fixed in https://issues.apache.org/jira/browse/KNOX-636. > > > > > >> > > > > > > > > >> > > > On Wed, Dec 2, 2015 at 12:42 PM, larry mccay < > > > > > larry.mc...@gmail.com > > > > > >> > > > > > > >> > > > wrote: > > > > > >> > > > > > > > > >> > > > > Sure - I can file a JIRA and commit a fix. > > > > > >> > > > > > > > > > >> > > > > The secret generation should be done in one instance and > > > > > >> replicated > > > > > >> > > > across > > > > > >> > > > > others. > > > > > >> > > > > This replication/management of the credential stores is > > > > outside > > > > > of > > > > > >> > the > > > > > >> > > > > scope of Knox itself as of now. > > > > > >> > > > > > > > > > >> > > > > Documentation is done in markdown and is contributing > > > details > > > > > are > > > > > >> > > > > available at: > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/KNOX/Contribution+Process#ContributionProcess-DocumentationContributorWorkflow > > > > > >> > > > > > > > > > >> > > > > Which should give you a general idea. > > > > > >> > > > > > > > > > >> > > > > Find an example like: ./trunk/books/0.7.0/ > > > > > >> > > config_preauth_sso_provider.md > > > > > >> > > > > > > > > > >> > > > > For an example of typical content and format. > > > > > >> > > > > > > > > > >> > > > > Here is how that example renders: > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > http://knox.apache.org/books/knox-0-7-0/user-guide.html#Preauthenticated+SSO+Provider > > > > > >> > > > > > > > > > >> > > > > You'll need to tie it into the rest of the book - just > > grep > > > > for > > > > > >> where > > > > > >> > > > that > > > > > >> > > > > filename is referenced. > > > > > >> > > > > To test how it renders build the site with: "ant" and > note > > > the > > > > > >> url to > > > > > >> > > the > > > > > >> > > > > 0.7.0 book. > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > On Wed, Dec 2, 2015 at 12:12 PM, Jérôme LELEU < > > > > lel...@gmail.com > > > > > > > > > > > >> > > wrote: > > > > > >> > > > > > > > > > >> > > > >> Hi, > > > > > >> > > > >> > > > > > >> > > > >> Why it doesn't work for pac4j while it works for others > > is > > > a > > > > > bit > > > > > >> > > strange > > > > > >> > > > >> to > > > > > >> > > > >> me, but if you have the patch in front of your eyes, > I'd > > > > rather > > > > > >> > prefer > > > > > >> > > > you > > > > > >> > > > >> to commit it. In all cases, I'll sync with the master. > > > > > >> > > > >> > > > > > >> > > > >> There was one question you didn't answer previously: is > > the > > > > > >> password > > > > > >> > > > >> generated for the pac4j provider the same across all > > > gateway > > > > > >> > > instances? > > > > > >> > > > >> Because I expect to have the same value as I use it to > > > > encrypt > > > > > / > > > > > >> > > decrypt > > > > > >> > > > >> data. > > > > > >> > > > >> > > > > > >> > > > >> I will add the Javadoc. After that, you can review the > > pull > > > > > >> request > > > > > >> > > more > > > > > >> > > > >> completely. > > > > > >> > > > >> > > > > > >> > > > >> What do you expect for the documentation? > > > > > >> > > > >> > > > > > >> > > > >> Notice that pac4j dependencies are still snapshots, but > > > they > > > > > >> will be > > > > > >> > > > >> released in a week or two. > > > > > >> > > > >> > > > > > >> > > > >> Thanks. > > > > > >> > > > >> Best regards, > > > > > >> > > > >> Jérôme > > > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> 2015-12-02 17:51 GMT+01:00 larry mccay < > > > > larry.mc...@gmail.com > > > > > >: > > > > > >> > > > >> > > > > > >> > > > >> > Jérôme - > > > > > >> > > > >> > > > > > > >> > > > >> > If you would like to add that change as part of your > > > patch > > > > or > > > > > >> as a > > > > > >> > > > >> > separately filed JIRA to fix a bug that would > certainly > > > be > > > > > >> > welcomed. > > > > > >> > > > >> > Otherwise, I can do it. > > > > > >> > > > >> > > > > > > >> > > > >> > Let me know. > > > > > >> > > > >> > > > > > > >> > > > >> > thanks, > > > > > >> > > > >> > > > > > > >> > > > >> > --larry > > > > > >> > > > >> > > > > > > >> > > > >> > On Wed, Dec 2, 2015 at 11:44 AM, larry mccay < > > > > > >> > larry.mc...@gmail.com > > > > > >> > > > > > > > > >> > > > >> > wrote: > > > > > >> > > > >> > > > > > > >> > > > >> > > Okay - I had to add an override of > getUserPrincipal() > > > to > > > > > the > > > > > >> > > > >> > > IdentityAsserterHttpServletRequestWrapper and > return > > > the > > > > > >> member > > > > > >> > > > >> variable > > > > > >> > > > >> > > username and it works like a charm. > > > > > >> > > > >> > > > > > > > >> > > > >> > > Why I haven't seen this same behavior with other > > > > providers > > > > > >> is a > > > > > >> > > bit > > > > > >> > > > >> of a > > > > > >> > > > >> > > mystery but they must be adding other wrappers that > > > > handle > > > > > >> it. > > > > > >> > > > >> > > This is quite cool, Jérôme! > > > > > >> > > > >> > > > > > > > >> > > > >> > > On Wed, Dec 2, 2015 at 10:41 AM, larry mccay < > > > > > >> > > larry.mc...@gmail.com > > > > > >> > > > > > > > > > >> > > > >> > > wrote: > > > > > >> > > > >> > > > > > > > >> > > > >> > >> That was it - thanks! > > > > > >> > > > >> > >> > > > > > >> > > > >> > >> On Wed, Dec 2, 2015 at 10:20 AM, Jérôme LELEU < > > > > > >> > lel...@gmail.com> > > > > > >> > > > >> wrote: > > > > > >> > > > >> > >> > > > > > >> > > > >> > >>> This is my exact command line: mvn -Prelease > clean > > > > > install > > > > > >> > > > >> -DskipTests > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >>> You use an internal Maven repository to fetch > > > > > dependencies > > > > > >> > from > > > > > >> > > > >> > internet: > > > > > >> > > > >> > >>> > > > > > >> > > > > > http://nexus-private.hortonworks.com/nexus/content/groups/public/ > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >>> Does this repository have access to the remote > > > > Snapshots > > > > > >> > > Sonatype > > > > > >> > > > >> repo? > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >>> 2015-12-02 16:16 GMT+01:00 larry mccay < > > > > > >> larry.mc...@gmail.com > > > > > >> > >: > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >>> > hmmm - I used: > > > > > >> > > > >> > >>> > > > > > > >> > > > >> > >>> > mvn clean install -DskipTests=true -Prelease > > > > > >> > > > >> > >>> > > > > > > >> > > > >> > >>> > The repository entry is in there already. > > > > > >> > > > >> > >>> > No worky. > > > > > >> > > > >> > >>> > > > > > > >> > > > >> > >>> > On Wed, Dec 2, 2015 at 10:12 AM, Jérôme LELEU < > > > > > >> > > lel...@gmail.com > > > > > >> > > > > > > > > > >> > > > >> > >>> wrote: > > > > > >> > > > >> > >>> > > > > > > >> > > > >> > >>> > > Hi, > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > You need the j2e-pac4j dependencies as well > as > > > the > > > > > >> pac4j-* > > > > > >> > > > >> > >>> dependencies, > > > > > >> > > > >> > >>> > > but you don't need to build them locally > > > > (hopefully). > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > But you need a dependency on the Sonatype > > > snapshots > > > > > >> > > repository > > > > > >> > > > >> > >>> (where the > > > > > >> > > > >> > >>> > > snapshot versions are hosted), which is added > > for > > > > > >> Maven in > > > > > >> > > the > > > > > >> > > > >> root > > > > > >> > > > >> > >>> > > pom.xml: > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > > > > > >> > > > >> > >>> > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > https://github.com/apache/knox/pull/2/files#diff-600376dffeb79835ede4a0b285078036R123 > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > If you use Ant for the build, there is maybe > a > > > > glitch > > > > > >> to > > > > > >> > > find > > > > > >> > > > >> the > > > > > >> > > > >> > >>> > Sonatype > > > > > >> > > > >> > >>> > > Maven repo. > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > Thanks. > > > > > >> > > > >> > >>> > > Best regards, > > > > > >> > > > >> > >>> > > Jérôme > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > 2015-12-02 16:06 GMT+01:00 larry mccay < > > > > > >> > > larry.mc...@gmail.com > > > > > >> > > > >: > > > > > >> > > > >> > >>> > > > > > > > >> > > > >> > >>> > > > Oh - do I need to build j2e-pac4 locally in > > > order > > > > > to > > > > > >> > > resolve > > > > > >> > > > >> the > > > > > >> > > > >> > >>> > > > dependencies? > > > > > >> > > > >> > >>> > > > > > > > > >> > > > >> > >>> > > > [ERROR] Failed to execute goal on project > > > > > >> > > > >> > >>> > > gateway-provider-security-pac4j: > > > > > >> > > > >> > >>> > > > Could not resolve dependencies for project > > > > > >> > > > >> > >>> > > > > > > > > >> > > > >> > >>> > > > > > >> > > > > > > > > org.apache.knox:gateway-provider-security-pac4j:jar:0.7.0-SNAPSHOT: > > > > > >> > > > >> The > > > > > >> > > > >> > >>> > > > following artifacts could not be resolved: > > > > > >> > > > >> > >>> > > > org.pac4j:j2e-pac4j:jar:1.2.1-SNAPSHOT, > > > > > >> > > > >> > >>> > > > org.pac4j:pac4j-http:jar:1.8.1-SNAPSHOT, > > > > > >> > > > >> > >>> > > > org.pac4j:pac4j-config:jar:1.8.1-SNAPSHOT: > > > Could > > > > > not > > > > > >> > find > > > > > >> > > > >> > artifact > > > > > >> > > > >> > >>> > > > org.pac4j:j2e-pac4j:jar:1.2.1-SNAPSHOT in > > > public > > > > ( > > > > > >> > > > >> > >>> > > > > > > > > >> > > > >> > > > > > > >> > http://nexus-private.hortonworks.com/nexus/content/groups/public/ > > > > > >> > ) > > > > > >> > > > >> > >>> -> > > > > > >> > > > >> > >>> > > > [Help > > > > > >> > > > >> > >>> > > > 1] > > > > > >> > > > >> > >>> > > > > > > > > >> > > > >> > >>> > > > On Wed, Dec 2, 2015 at 10:05 AM, larry > mccay > > < > > > > > >> > > > >> > >>> larry.mc...@gmail.com> > > > > > >> > > > >> > >>> > > > wrote: > > > > > >> > > > >> > >>> > > > > > > > > >> > > > >> > >>> > > > > gateway-provider-security-pac4j doesn't > > > build - > > > > > do > > > > > >> you > > > > > >> > > > have > > > > > >> > > > >> a > > > > > >> > > > >> > >>> pending > > > > > >> > > > >> > >>> > > > > change for your pom.xml or something? > > > > > >> > > > >> > >>> > > > > > > > > > >> > > > >> > >>> > > > > > > >> > > > >> > >>> > > > > > >> > > > >> > >> > > > > > >> > > > >> > >> > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > >
