I am suggesting a 2.5" HDD caddy, like these: http://newmode.us/caddies/ If you are lucky to get a new laptop, you simply purchase the appropriate caddy and move the HDD into it.
I will speculate the vast majority of digital radio reflector subscribers are from the "roll your own" camp. The idea that an IT department would hand you a new laptop, have all the applications setup, have all the login scripts created, all the forced password renewals installed, and have your access to the operating system locked out... is a little hard to believe. But this is the reality in most corporations today. IF Andy works for a company that has no IT department (or has weak IT policies), he may have free reign over the laptop configuration. IF NOT, my solution is the safest way to keep his business use and personal use of the company asset separated. For the rest of us who "roll our own"... maybe you're lucky to work in the IT department. If not, you might be participating in a "career limiting activity". When it involved our corporate network/computer security, I have personally seen more than one person walked out the front door. In any case, I am way off topic for the Digitalradio Forum. Sometimes I get up on the soapbox. I do hope I shed some light on methods companies use to keep their computer environments "safe". 73 de Bob - KØRC in MN ----- Original Message ----- From: Salomao Fresco To: digitalradio@yahoogroups.com Sent: Friday, December 29, 2006 8:18 PM Subject: Re: [digitalradio] Re: External hard drives? Well, I believe your solution is way more complicated to perform. Besides, what use will have the docking station if the laptop gets replaced for instace for another brand? The USB PEN drive will work on almost every computer provided that the programs were correctly installed. And there is enough space on a 2Gb pen drive to install a version of the SO of your choice and make it bootable. I know what I'm talking, because I've allready done it. The docking station is waaay more expensive than the 20 bucks of a pen drive. Give it a try, if it doesn't work, the worst that can happen is getting "stuck with" a usb pen drive that can carrie a lot of files. Think of it. Regards On 12/30/06, Robert Chudek - KØRC <[EMAIL PROTECTED]> wrote: > Well in christ's name (your terminology), your solution doesn't solve Andy's > problem of putting personal software on a company computer. You missed the > part that the registry is going to get updated (if it is even accessible). > Read on. > > Credible IT departments tie down the operating system very tight in order to > reduce the probability of employees hauling worms, viruses, and other crap > into the office and spreading it across the Enterprise. I know, I ran a > corporate IT department for 8 years. From a pure IT perspective, laptops are > the most dangerous PC's on the Enterprise. It's much easier to control and > manage desktop machines. > > The solution I would propose is to purchase a new drive and caddy for the > laptop. Typically there is one screw that holds the HDD into the laptop and > that screw is accessible from the outside of the case. Depending on the > drive size you want, this can be less than a $100 investment. > > Get your own drive, format it up, load your OS, and install your personal > applications. Swap the drives when you want to run your radio applications > at home. But be aware if you bring your laptop into work with your personal > drive installed, you'll get hauled in front of the CIO to explain why you > are putting the company infrastructure in jeopardy. And the incident will be > written up in your permanent record. > > If this sounds blunt and excessive... well you don't understand the > nightmares IT departments face, trying to support large networks that wrap > around the world. > > I don't know for whom Andy works, but if it's a large corporation with an IT > staff, he may find the screw holding the disk caddy into his new laptop has > been superglued into place. My engineers didn't go to that extreme, but if > there was a laptop suspected of "issues", it got a fresh format and a > "standard build" of corporate licensed software installed. > > 73 de Bob - KØRC in MN > > > ----- Original Message ----- > From: Salomao Fresco > To: digitalradio@yahoogroups.com > Sent: Friday, December 29, 2006 2:26 PM > Subject: Re: [digitalradio] Re: External hard drives? > > > > Hi to all! > > I believe there is a big confusion! > > On the first post Andy states this: > I just got a new company laptop. > > What the heck does he need to know about master, slave, falt cables and > color of the power cables? > He is talking about a laptop for Christ sake. > He is asking you the time and you're telling him how the clocks work. > > He only wants to know if it is possible to load the Ham radio software > that he needs to work digi modes on a External Hard Disk. > I answer him YES, but there is no need to do it, why don't you try a Pen > Drive, there are lots on the market now and the prices are low enough, I > bought one with 1Gb for 19,99 euros a few months ago. > > How to use it? > Instead of installing the software in the Computers own hard disk, install > it on the flash drive (pen). > This way you can use work your digimodes in about any computer. (it might > not work with all programs, because some of them need to install some files > in the Windows folder). > > > > Regards & Happy new 2007 > > Sal > > On 12/29/06, Dave Doc Corio <[EMAIL PROTECTED]> wrote: > Excuse me for jumping in here, but I'd like to add one thing. Please be > sure the power supply in the PC is capable of carrying the extra load. Many > computers being made contain only a bare minimum power supply - usually on > the order of 200 or 250 watts. While this is adequate for what is in the PC > at the time it is shipped, adding peripherals can overload the power supply. > Adding an extra hard drive, CD/DVD burner, video card and audio card can tax > a minimal power supply and cause many problems. Usually, just adding one of > these is not a major concern, but consider upgrading the power supply if > you're adding several. A 450 watt power supply is generally fairly cheap - > on the order of $35 to $60, and can save headaches down the road! > > 73 > Dave > KB3MOW > > > A computer, intelligent, friend of mine has been educating me of > swapping > > hard drives... For example, drive C..is usually marked at 'master' and > the > > others are marked as slaves.... > > The marking is a jumper .. > > On the bank of your hard drive are three recepticles... > > The first one is a long plug, of which the data flows... > > The second plug / receptical contain 4 rather heavy wires.. marked > yellow, > > black, black and red.. they contain the D.C. wiring.. I assume by the > > colours.... > > The third plug has no opposite polarity receptical but contains > > jumper(s)... This is the jumper which determnes whether or not the > hard > > drive is a slave or master drive... > > On one side of your hard drive, you should notice some printing which > > tells you how to make the drive a master or slave... > > You follow the instructions to make that drive a master or slave.... > > This will allow you to put another drive onto your existing > computer.... > > including removing them should you desire.... > > I had three computers.. I took the oldest computer's hard drive out > and > > put them into my newer computer... making the older computer's drive C > my > > newer computer's drive D, or which ever letter was available.... > > Now I do realise I have probably drifted somewhat off topic but I hope > the > > information was of some value... > > > > Larry ve3fxq > > > > > > > -- > Cumprimentos > > Salomão Fresco > CT2IRJ > > If it works... dont fix it! > > > -- Cumprimentos Salomão Fresco CT2IRJ If it works... dont fix it!
