If that is a new USRP from factory then you don't need to update the
firmware.



On Mon, Oct 21, 2013 at 12:51 PM, Sandhya G <sandhya4...@gmail.com> wrote:

> Thanks for the reply.
> Well is that only problem so that i'm unable to communicate and should i
> need to update the firmware?
>
>
> Thanks and regards
> Sandhya.G
>
>
> On Mon, Oct 21, 2013 at 10:19 AM, Activecat <active...@gmail.com> wrote:
>
>> Your pc must have 1000Mbps port. The 10/100Mbps won't work.
>> An alternative is to connect a 10/100/1000 LAN switch between your pc and
>> the USRP.
>>
>> Rgds,
>> activecat.
>>
>>
>> On Mon, Oct 21, 2013 at 12:37 PM, Sandhya G <sandhya4...@gmail.com>wrote:
>>
>>> HI all,
>>>
>>>
>>> I have followed as per the instructions given in the webpage for set up
>>> of the Usrp N200/N210 but still i am unable to communicate between the
>>>  hardware and host pc
>>>
>>>
>>>
>>>                 1.I have set the static ip of the host pc to
>>> 192.168.10.1(ifconfig eth0 192.168.10.1).
>>>
>>> 2.Whenever i give the device address=addr=192.168.10.1 and run the grc i
>>> am getting the error has “*unknown key format*”
>>>
>>> 3.Whenever i ping 192.168.10.2 or use the command  uhb_find_device  i am
>>> getting warning as “*NO DEVICE FOUND* “
>>>
>>> 4. Is that a must i have to upload the fpga and firmware images when
>>> using the device for the first time.
>>>
>>> 5.Sometimes i am getting an error like”* unable to find as single
>>> device”.*
>>>
>>> *6.*The* *host pc is supporting only 10/100MBPS .Is that the only
>>> problem so that i am unable to communicate with the hardware.
>>>
>>>
>>>
>>> Can anybody help me on this issue.Awaiting for your valuable reply
>>>
>>>
>>> Thanks in advance
>>>
>>> Sandhya.G
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> Discuss-gnuradio@gnu.org
>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>>
>>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to