Hi Anish, quick remark:
20 MB/s = 160 Mbit/s -> won't fit through 100 Mb/s Ethernet.
Best regards,
Marcus
On 16.03.22 02:22, Anish Mangal wrote:
Hi,
I currently have a gnuradio flowgraph that requires high compute resources and is running
on a laptop with a high-end cpu which is connected to a LimeSDR.
That LimeSDR is eventually connected to a RF PA and an antenna for broadcast.
The limitation in this setup is that the laptop needs to be part of the physical setup
where the sdr and R.F. PA are placed.
I am wondering if it is possible to reliably make another gnuradio instance on a low
powered computer (like a intel minipc or raspberry pi) to interface with the SDR and be
connected to the high end cpu laptop via a lan cable. This would allow the laptop to be
placed far away easing physical constraints and also allow easier management.
Could someone point me at flowgraphs that would allow this?
The USB3 data rate between the GNURadio and LimeSDR is about 20MB/s, so it is well within
the data rates of 100M/1G lan connection.
Thank you.
Anish
--
Anish