OK, so what I'm going to do for Gen1 is nothing on the front panel, a green led on the back that is a real power led, it is directly across the incoming power feed.
On the back I'll also put a small RGB led connected to 3 pwm outputs of the processor, that way the color and intensity is fully under software control. The control for these is available under sysfs so any program including an applet under jivelite can control it. By default the led will be off, it will only go on when some software does something to it. This will let anybody who wants to play with it do so to their hearts content. During phase one we can play with it and find out if there is any use for it and determine if it needs to be on Gen2. The Ethernet jack has the fairly standard gigabit two leds, one of which is dual color. The brightness is going to be the same as on the wandboard. (I'm just using the wandboard schematic for this) So any of you that already have a wandboard can look at the Ethernet leds and see if the brightness is what you want. If feedback gets in in time I can change the leds for Gen1. John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
