Man in a van wrote: > I have it working now :) > > Unplugging the usb lead to the dac did the trick (as per your comments > on the github thread) > > But that's not a good thing. > > I removed the uhubctl instructions from the Tweaks page and restarted > squeezelite; the dac started to go into standby when I pressed the green > power button on the LMS gui. > > I restored playback and then used the pCP shutdown command to close the > pi, the dac followed suit. > > I repowered the raspberry pi, the dac came on line and I started > playback > > Pressing the LMS power button now only paused playback. > > I interrupted the usb power supply to the dac (I did not pull the dac > power plug or pull the usb cable from the dac, I 'used one of these' > (https://www.aqvox.de/usb-power_en.html) in the dac usb connection > > I had to restart squeezelite to restore playback but the power switch > then put the dac into standby > > Not very good really. > > As you seemed to hint at in the github thread a cron job to stop / start > the usb-power after restart might solve the problem. > > Or use the remote control to select an used input on the dac :):) > > The raspberrypi OS works much better in this respect. > > > ronnieThose uhubctl commands simulate removing and replacing the USB cable. If you don't use them then you need to unplug and replace the USB cable every time the Pi is restarted.
Sent from my Pixel 3a using Tapatalk ------------------------------------------------------------------------ slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=117179 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
