Hello,
When I installed, Fred was not the default voice, Alex was.
Dan
On Oct 26, 2007, at 10:04 PM, Dean Hudson wrote:
There could be another issue going on. The volume for the speech
could be too low. You can bring up the speech roter (VOKeys-
command) then navigate to the volume option, which is two presses on
the right arrow key when holding down the control-option-command,
then pressing up arrow with those modifier keys pressed. It will
say 100-percent, but just keep pressing up arrow, and the volume
will increase. Note, the speech during the installation is Fred,
not Alex. Alex comes in to effect once you star the setup assistant.
If you still don't hear speech during the installer, then there is a
bug.
On Oct 26, 2007, at 9:12 PM, Cheryl Homiak wrote:
Sorry if saying this is too obvious, but when you put in the
installer cd and it revs up, you do have to use cmd-f5 to turn on
voiceover.
--
Cheryl
"Where your treasure is,
there will your heart be also."
